Question about Emerson EWF2703 27" TV

2 Answers

Tv trouble No picture, just a black screen with a solid white line in middle of screen, do have sound though. Help?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: tv trouble

We have the same problem with our TV. Did you get it fixed? Where do you go to get that fixed and how much did it cost? Thanks!

Posted on Feb 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 74 Answers
Re: tv trouble

MOST BE A VERTICAL PROBLEM if the line cross the screen from left to rigth,,, and if the line cross the screen from top to buttom then is an horizontal circuit problem any way you need a tech how ever if you know about tv repair and have somes skill in the campus try resoldering the vertical output IC....good luck and rate me

Posted on Jan 20, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

White line in middle of screen on a cx32h60 toshiba tv

The vertical sweep output is absent. Check its vertical output section circuit for the fault. Check all the solder terminals of that section, and resolder them by applying a little more solder. Take special care to the solder terminals of the vertical output IC. If these do not help you, check and replace the vertical output IC.

Jul 07, 2012 | Toshiba CX32H60 TV

1 Answer

No picture no sound

Did you mean the picture is collapsed only in the middle horizontally(white line appears on the middle part of the screen)?
If that is the case, maybe vertical IC failed or loose connection.

Apr 05, 2009 | Toshiba CF32H40 32" TV

1 Answer

Problem with tv

The problem is sometimes caused by the vertical output integrated circuit (IC) failing, but usually it's bad solder connections. If you or someone you know is comfortable with electronic soldering, a few minutes spent resoldering the IC pins to the circuit board will often solve the problem. Failure of these connections is common because the IC gets quite hot (and it's mounted on a metal heat sink). The heating and cooling cycles cause the solder joints on the circuit board to crack. You can usually see the trouble with light and a magnifying glass; gray grainy joints instead of shiny connections, and often visible ring cracks around the pins.

Mar 31, 2009 | Konka K1938U 19" TV

1 Answer

Screen black no sound or picture with line in center

this is a common problem,the vertical hold has been damaged.dont leave the teli. on,the white line will burn the middle of the screen and leave a black mark. You need a new integrated circuit(i.c.) for vertical hold.

Mar 17, 2009 | Standard (CRT) Televisions

1 Answer

RCA tv model F32649 white horizontal lines

the problem of your tv is in vertical section, to be sure change all the capacitor in vertical section.

Sep 27, 2008 | RCA F32649 32" TV

1 Answer

TV Keeps flashing Fuzzy black and white static then the picture appears

The half picture is a verticale problem. This is difficult to repair. Send to a repair shop.

Jul 19, 2008 | Sony KV-36XBR450 36" TV

1 Answer

Black screen with sound only no picture.

I have same problem,it appears to be the flyback

Apr 18, 2008 | Hitachi 32UDX10S 32" TV

1 Answer


No vertical deflection. Vertical output IC, caps.

Nov 25, 2007 | Standard (CRT) Televisions

1 Answer

32 inch panasonic tv

Your problem is in the vertical deflection circuit. If you know how to solder it may just be a cold solder connection, but if you try to solder it and it still does not work, you may have a bad Vertical output IC. This set has really no user replaceable parts unless you have some no how on serviceing solid state printed circuit boards. If you dont , my advise would to seek out a repair depot and have them fix this set for you. It should not run more then 150 bucks or so. Good Luck Ps please do not forget to rate this thread.

Nov 12, 2006 | Panasonic CT-32D12D 32" TV

3 Answers

I have a thin bright white line,horizontal,no picture

i have panasonic sophia tv 29" i have white horizontal line on middle of screen i know i have to solder ic but where is the ic located on main circuit board. thankx

Aug 22, 2006 | Jensen TS2750J TV

Not finding what you are looking for?
Emerson EWF2703 27" TV Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66518 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you an Emerson Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides