Question about Tripp Lite Lite OmniSmart 1400 PNP (OMNISMART1400PNP) UPS System

Open Question

Blinking "Replace Battery" light on Omni Smart 1400 PNP

Our "Omni Smart 1400 PNP" (#1) had dead batteries, so we replaced them (#2).
When powered on, the "Replace Battery" light blinks ... something
not covered in the manual. (Manual discusses it being off or being continuously on.)

Any suggestions?

Speaking of manuals ... the tripp-lite.com web site doesn't know about our model (#3)
(OM3389, aka "Omni Smart 1400 PNP"). It knows about "OmniSmart 1400" (no blank, no "PNP"),
and about "OmniSmart 300 PNP" (no blank) ... the manuals for those two are essentially
identical to each other, and neither mention a blinking "replace battery" light.

The UPS's date code is JX2AU

thanks,

--------------------
#1. yes, that's the exact spelling and spacing ... not "OmniSmart" like Tripp-Lite uses now.
Our guess is that Tripp-Lite dropped the space from the phrase
"Omni Smart" sometime after we purchased ours.

#2. yes, with the correct model/style of batteries :)

#3. *many* non-Tripp-Lite web pages have "OmniSmart 1400 PNP" references, so it's not just us!

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Tripp Lite

Sorry but I was not able to repair the problem

Posted on Aug 22, 2008

Ad
  • 3 Answers

SOURCE: Tripp Lite OMNI 1000 LCD will not stay on

Turn UPS on: Press and hold the ON/OFF button for one second.
Run a Self-Test: Press and hold the MUTE/TEST button for two seconds (until alarm beeps several times).
The test will last 10 seconds. All LCD Display icons will be illuminated and the alarm will sound.
If the fault icon remains lit, the battery-supplied outlets are overloaded. Unplug powered devices until you remove the overload.
If the "Replace" icon remains lit and alarm continues to sound, the UPS batteries need to be recharged or replaced. Allow UPS to charge for 24 hours and repeat self-test.

Posted on Oct 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont dell i15rv-9762blk wont turn on


Obviously there are no error messages, so it isn't a simple failure.
Several reasons:
1. Dead or damaged battery - look for laptop battery error light or replace battery (borrow a working battery to test)
2. Dead or damaged Power Supply- look for power-on light to confirm operation. Replace PS if dead. (Borrow?)
3. System board failure. No lights/errors messages etc. Place warranty claim.

Aug 10, 2014 | Dell Computers & Internet

3 Answers

My dell inspiron mini 10 won't boot.There is just a flash of white light then a flash of amber light when I press the power button. That's it, nothing else.


Remove the main battery and try again, also! the power adapter charger should be checked for correct voltage, if okay! pull one stick of ram and test, and the second piece not forgetting to put the first one back and power up, if all this fails you will need to get it assessed.

Mar 25, 2012 | Dell Inspiron Mini Netbooks

1 Answer

I have a omni 1000 lcd. power went off when it came on the thing won't work. When I bypass the unit and plug my TV into the power out let the TV works . Have any idea what could be going on ,is the...


The UPS is either off, has a dead battery or is dead. Does the UPS power anything at the surge only outlets? If it doesn't, it's off or dead. Turn it on and check again.

The Omni 100 VS does not have a user-replaceable battery or other parts. If the battery or UPS is dead, replace it.

I hope this helps.

Cindy Wells
(when the UPS is off but connected to power, the battery should charge.)

Jun 28, 2011 | Tripp Lite (OMNI1000LCD) UPS System

1 Answer

How to extract batteries from an APC Smart UPS 1400


greg milton, Hi, Did you get the top cover off of the "1400" battery back-up? How old were the batteries in the unit? My APC 1250 has two 12v 18ah units inside. It's best to replace batteries every 3 to 5 years! 12fixlouie

Aug 20, 2010 | NEC APC Smart-UPS 1400 (050-01803-000) UPS...

1 Answer

Hi my APC 1500VA smart UPS show overload without any load in battery mode, but when switched on AC power all lights are blinking. plz describe me how to resolve this Issue?


Contact APC Customer Service. They will help you resolve this. If unit is still under warranty they will replace it. There is nothing you can do to repair anything yourself. Sorry ... try calling 1-800-555-2725800-555-2725 for support from APC

May 06, 2010 | APC Smart-UPS 1500VA Shipboard...

1 Answer

Flashing light


Blinking amber light is never good.
It could mean the battery is dead, a ground fault or something else.
Your best bet is to call the vendor.
If you don't find the answer at their website you can email or call them.
Here's a link:
http://www.tripplite.com/en/support/index.cfm
You should start with the owner's manual.

Vote for this solution if it helps.

Aug 17, 2009 | Compaq Tripp Lite OmniSmart 500 PNP...

1 Answer

Smart UPS 1400 - worth keeping or is it time to upgrade?


The basic design hasn't changed since day one...there maybe a few more bells and whistles now, If the unit is working fine...change the battery...and use the unit...BTW..just for your info large UPS'S are kept in service for 10-15 years or longer...hope this helps

Jun 18, 2009 | NEC APC Smart-UPS 1400 (050-01803-000) UPS...

1 Answer

APC Smart-UPS 1400 no power


Better late than never...

The older Smart UPS models are peculiar in the way that they appear dead (will not power on) if the battery is completely bad.

Replace the battery, and the UPS should come back to life.

Jul 01, 2008 | NEC APC Smart-UPS 1400 (050-01803-000) UPS...

1 Answer

After powering on, all non-graph LEDs keep blinking


That meens that UPS dont have battery power for minimum time (2min). Unplug some devices so UPS load need to drop below 25% and lets UPS recharge battery

May 31, 2008 | NEC APC Smart-UPS 1400 (050-01803-000) UPS...

2 Answers

Question about APC Smart-UPS 1400


This is the battery you need to replace http://www.batterywholesale.com/battery-store/proddetail.html?prodID=619
Ther are a few places to get one

Nov 03, 2007 | NEC APC Smart-UPS 1400 (050-01803-000) UPS...

Not finding what you are looking for?
Tripp Lite Lite OmniSmart 1400 PNP (OMNISMART1400PNP) UPS System Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tripp Lite Computers & Internet Experts

Cindy Wells

Level 3 Expert

5384 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

240cpa

Level 3 Expert

548 Answers

Are you a Tripp Lite Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...