I have an ILO 32" tv. On the back it has the audio in plugs, what I'm need to use, is the audio out to hook a video game chair up. there is only one audio out and it is black. I'm need to know what I need to have, to get it hooked up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I was able to find a service manual online which lists the inputs for that TV as the following:
RF connector (cable/antenna)
Composite (yellow video, red/white audio)
Component (red/green/blue video, red/white audio)
D-Sub (analog PC connector)
DVI (digital PC connector)
Your Playstation would need to be plugged into either the component or composite connectors depending on which Playstation you have. The Playstation 1, Playstation 2, and Playstation 3 all can use the same composite cable, and the Playstation 2 and Playstation 3 can both use the same component cable. The Playstation 4 only uses HDMI, which your TV doesn't support, so you would need to use an HDMI to component converter (under $20 on Amazon).
As for the Roku, same rules apply, but it again depends on your Roku model.
Boompods are made by LumiSource, the maker of Boomchairs. How to hook up your chair to most devices are on the www.boomchair.com website. The Boompod is made to play primarily hand held games, like PSP, Nintendo DX, etc. But you just need the audio cords with the red and white RCA jacks on both ends to hook up to your TV's audio output. Go to a Radio Shack and they'll hook you up.
i have a ilo 32 in hdmi hdtv and i have mine hook up to direct tv .on the back of the receiver plug your red,white and yellow into the audio 1 of the direct receiver. on the back of your ilo tv plug the other end to the av1 and use S-VIDEO ALSO. plug the sat cord to the ant.in. on the tv set remote hit video and go down to s-video and hit ok. you need to plug all three plugs into their color ans the s-video too in the AUDIO section. mine works great !
I have my television outputs connected to the inputs on the ILO. I then select that set of inputs with the SOURCE button rather then using the built in tuner. Make sure you connect the Video closest to the audio inputs(or... least confusing, try the three front inputs) Hook antenna to tv