Question about TurboChef C3 Single Oven

1 Answer

I own a subway store, we use a turbochef tornado i believe, there are a few parts that need to be replaced (i had to buy them myself, and try to replace them myself, because i cant afford to pay for service, its extremly expencive). i replaced a few parts before including waveguides. parts that i need alittle help with are ngc 3017 and ngc 3016. they seem like they go under the wave guides, from the bottom of the overn. so am i supposed to take off the side, and top covers, would i be able to get to it that way. how hard is it to replace these parts anyway?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 75 Answers

Send me an e-mail at mckennasubway@gmail.com since your a subway owner i can help you get your parts cheap. I hope your not paying retail for these parts.

easy to replace you need to take the top and right cover off. Usually you would replace the mags at this time also

Posted on Jan 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Subway TurboChef will not get hot - who or how can I repair this


You may need to replace the heater coils. Contact the manufacturer for details.

Jun 08, 2015 | TurboChef TORNADO Electric Oven

1 Answer

I bought my turbochef NGCEW ex Subway. It heats up no problem and then shows the Subway menus but I can't seem to access the edit menu. Also, some of the keys don't beep when I press


This might help you out:

http://www.basequipment.com/v/service/TurboChef/NGC.pdf


It's a service manual for the TurboChef NGC Tornado.

Pay particular attention to pages 15 through 19. It shows you how to edit menus and to reset everything.

Good luck!

Oct 21, 2014 | TurboChef TORNADO Electric Oven

1 Answer

Our Subway Turbochef Toaster has a keypad issue.


check pad connections if all good you need new pad

Dec 01, 2011 | TurboChef TORNADO Electric Oven

1 Answer

Hi i have turbochef speed oven in subway and on display show F6 ec Temp . what is problem


Hi,
F6 faults occured when temperature reached to 150 degree faharanite in the electrical compartment.
Solutions
1. Clean the dust in the electrical compartment.
2. There is an temperature sensor on the controle board which gets dirty and throw wrong values.Clean it and then try.
3. Check the exaust fan in the top rear location is working properly.
4.Check for proper air ventillation.

Apr 15, 2011 | TurboChef TORNADO Electric Oven

1 Answer

I am working on an NGC subway oven and the store manager told me it would only heat up half way


Check the IR element. check the heaters. check the high limit switch on the back of the oven. Usually the IR element will have burned wires where it enters the oven and will need replacing.

Oct 06, 2010 | TurboChef TORNADO Electric Oven

4 Answers

I have NGC tornado Turbochef, it is toasting too


the subway ovens are supposed to be around 1000 dont change any of the settings if you think you are having programming issues speak to your field rep and ask them to reprogram your oven. they have a smart card for doing this. it will give you all the latest buttons including hashbrowns and breakfast stuff.

most common problem with toasting to dark is that you are using the wrong buttons

try cooking the next sandwich on the 1meat hotwell setting and select the sandwich size. you will notice the sandwich cooks much lighter.

if you cook using the combo subs button this could be your problem. most of the time re-training is just needed

Dec 11, 2009 | TurboChef TORNADO Electric Oven

3 Answers

This is the 3rd time for this turboChef oven - door not closed.


it is because the switch kits are not setup properly.they need to set to open and shut in the right order,hope this helps regards lse

Jan 16, 2009 | TurboChef TORNADO Electric Oven

2 Answers

CAN LOCAL ENGINEERS REPAIR TURBOCHEF TORNADO OVEN?


I would go ahead and give that a try using the local guy. It may just be a burned wire and they coould fixit right there. Always support the local engineers that way if you have a emergency they will bend over backwarsds to help out.

Jan 15, 2009 | TurboChef TORNADO Electric Oven

3 Answers

Turbochef Oven Repair


goto http://www.hobartcorp.com/default.aspxs site its hobart.Find the nearest office to you,either they will service your equipment or can lead you in the right direction.

Nov 16, 2007 | TurboChef TORNADO Electric Oven

Not finding what you are looking for?
TurboChef C3 Single Oven Logo

Related Topics:

950 people viewed this question

Ask a Question

Usually answered in minutes!

Top TurboChef Ovens Experts

Brad Brown

Level 3 Expert

17151 Answers

Dennis Boxerman

Level 3 Expert

1252 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a TurboChef Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...