Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F06 error with a ghw9150pw4 model whirlpool front loader washer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 230 Answers

HI There
Here what you need on error codes.
Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.

  • Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the Drive Motor
  • Check the MCU
  • Check the Wire Harness
Hope this helps let me know. Thank you for writing to fix ya.
Best regards Richard

Posted on Dec 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Whirlpool Duet is showing error codes f06 and e02 and wont unlock door or run cycle, what can I do?


Janice,
Here is a link to a website that gives the F06 code, but I cannot find the other code.
http://www.appliancepartspros.com/repair-help/whirlpool-fault-codes.
Scroll down towards the bottom to find the Duet fault codes.

Jul 28, 2015 | Whirlpool WFW94HEX Duet 5.0 cu. ft. Front...

1 Answer

RCA Whirlpool Front load washer model GHW9150PW4 error code F06 Motor tries to start and makes noise and stops


please try a hard reset by leaving the unit plugged off from the wall power for one night

the error code may vanish

also this seems to be like a motor starter problem

Aug 02, 2008 | Whirlpool Washing Machines

1 Answer

Whirlpool duet front load washer, F06 error


FROM WHAT I CAN FIND OUT YOU HAVE A DRIVE MOTOR PROBLEM,
IF YOU TYPE IN YOUR SEARCH BOX (WHIRLPOOL FAULT CODE F06) there are several several sites that tell you how to fix it

Nov 25, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a whirlpool Duet Front loader Washer Model GHW9150PW4


there is a book inside the washer in bottom or back that gives you the trouble codes

Jun 14, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirpool washer front end loader lock light is on. but i can open the door the wash is empty. unplugged replugged it and tested the GIF the plug its in had power too, other wise the light to the lock...


unplug the washer, remove the lower front panel, put your hand under the front panel and pull a little lever behind the door lock mechanism and pull the door open.

Feb 05, 2011 | Whirlpool Washing Machines

1 Answer

Hw do I replae the washer bellow seal on a whirlpool duet washer


The following link explains step-by-step how to change the door bellow on a Whirlpool Duet series front loader:

http://www.fixya.com/support/r3574186-installing_a_door_bellow_on_a_front_load


Replacement parts (if required) can be purchased at any of the following web sites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

I have found these sites to be reputable and provide great service. Prices differ between them, so shop and compare. The first three sites I've listed have helpful exploded view parts illustrations to assist you with locating and properly identifying the parts you may need.

If you have any questions about this repair, please post back and let me know. If the link does not take you directly to the instructions I provided, copy and paste the link to your web browser. I hope you find this information helpful.

May 22, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer quits be for the spin cycle code pops up fo2 model # ghw9150pw4


I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer ID doesn't mean
anything to me. It's been about 55 years since I had experience with front load washers. However I can refer you to Applianceaid.com where they have very good and complete trouble shooting and repair information on front loaders. I think you'll find what you need there. Don't worry about the timer, they hardly ever go bad. Good luck with it.

Nov 25, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

WHIRLPOOL GHW9150PW4 DUET WASHER DOESN'T SPIN AFTER START


F/06 Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.
  • Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the Drive Motor
  • Check the MCU
  • Check the Wire Harness

Mar 11, 2009 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...