Question about AT&T ATT-974 Corded Phone

2 Answers

AT&T 974 Caller ID has quit.

We had a power outage and after that the Caller ID no longer works on my AT&T 974. All the other 974's are fine. The batteries held all the contacts and settings, but no caller id. Is there a setting to change or is the caller id toast?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Unplug everything then replug should reset the Caller ID

Posted on Apr 08, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 3 Answers

Same thing happened to me. Here's what I did: 1) Unplug phone. 2) Remove backup battery. 3) Wait at least 5 minutes. 4) Plug phone back in and insert battery.

Step 3 is important. I only waited about a minute the first time and the problem remained.

Posted on Sep 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our Uniden cordless phone has quit showing numbers calling us (caller I.D. isn't working - stopped all at once)? ?


Posting this under communications equipment, rather than Cameras, is more likely to get a response

Jul 30, 2017 | IT Works Cameras

1 Answer

My caller id is not working on my at&t 974 phone


Same thing happened to me. Here's what I did: 1) Unplug phone. 2) Remove backup battery. 3) Wait at least 5 minutes. 4) Plug phone back in and insert battery.

Step 3 is important. I only waited about a minute the first time and the problem remained.

Jan 07, 2014 | AT&T ATT-974 Corded Phone

1 Answer

Seimens Gigaset AL285 BSNL caller ID not working


The source of my caller ID not displaying was a faulty ADSL filter.
For some reason my ADSL filter blocked the caller id information - but worked fine otherwise.
When I changed the filter the caller ID worked fine again.

Jun 05, 2012 | Siemens Lands Phones

1 Answer

I have a panasonic kx ta824 system with caller id. Caller id works fine on lines 2 & 3, but no longer works on line 1. This is a new problem after 3 years of it working properly. I checked the...


Hard to say. So, go to the cabinet and swap the connections between line 1 and line 2. If the CID still comes in on line 2 and not 1, then it's hardware or programming. If it doesn't come in on 2, then it's a telco issue. Since you checked programming, it would only leave hardware. The 82493 card plugs into a slot on the main board.

Carl

Mar 15, 2011 | Panasonic KX-TA824PK Phone

1 Answer

Caller ID not working


hi,

here is your manual

http://support.radioshack.com/support_phones/doc65/65839.pdf

May 29, 2010 | Radio Shack TAD3803 Digital Answering...

1 Answer

I have a 974, 945, and 955 phones in a 2-line office. I am getting a squeal on the intercom when I call just one phone. It works fine between other phones. It worked for 2 years and then the squeal showed...


Check the battery on all the phones then make sure they are all programmed with different extension numbers. If the battery has been dead and you have had a power outage then it may have reset the phone to factory default extension 11.

Dec 03, 2009 | AT&T ATT-974 Corded Phone

1 Answer

ATT/Lucent 854 ringing after power outage


Press PROGRAM
Press *
Press #
Enter 2 digits (11 through 22)
Press INTERCOM

This should work.

Mar 22, 2009 | AT&T ATT-974 Corded Phone

1 Answer

Lost power for one second and now cannot get my caller ID to work


unplug the telephone cable from the back of the receiver and plug it a basic telephone to check if there is a dial tone. if there is a dial tone restart the receiver without the the telephone line plugged in. after it loads and u have a picture, plug in the telephone line. call the home to check. if its not working the modem in the receiver has gone bad.

Oct 20, 2008 | Directv Plus DVR DTV Receiver / 100-Hours...

1 Answer

Caller id


the digital answer machine did not torn on? Why?

Feb 05, 2008 | Panasonic KX-TGA560M 5.8 GHz Cordless...

4 Answers

Caller-id quit working


I have the same problem with my unit. Emerson customer service made some suggestions, including pulling the 9V battery, disconnecting the phone from phone and power for 3 hours, etc. Their first suggestion (earlier this morning) was to Push "Up" button and hold for 4 seconds, then pressing the "delete" button three times and re-pressing the "Up" button for 6 seconds. That procedure failed. I'm in the midst of the 3 hour wait after full disconnect of phone line and 120V plug. I don't think my phone will come back. I'll be happy if it does. Good luck with yours...Richard

Jan 12, 2007 | Emerson EM-CKT9087 Corded Phone

Not finding what you are looking for?
AT&T ATT-974 Corded Phone Logo

687 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Paul C.

Level 2 Expert

68 Answers

Cindy Wells

Level 3 Expert

5647 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...