Zanussi ZWD1470W fabric conditioner compartment won't drain

Try taking out the drawer and washing it our thoroughly. They get clogged up with residues.

Hello Patrick Compton,

Start on PAGE 17 of your REGULAR MAINTENANCE...
in your owners manual... You are most probably looking at a MINOR MAINTENANCE ISSUE... in your dispenser drawer...!!

Else...
You are going to be looking for the valve... for your conditioner/softner dispenser...

CHECK out owners manual (below)

Look up you ORIGINAL parts number and get three estimates!!

Good luck

Hope this helps.


Zanussi ZWF12070 S1 User Manual

Zanussi ZWF12070W1 Washing Machine Spares

Zanussi ZWF12070W1 Washing Machine in White

This video will show you how to keep your soap draw clear and how to service the parts
a 4 THUMBS rating is appreciated for answering your FREE question.

zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question. And don't forget to like us on facebook

check the drain filter is not blocked if it does not empty all the water it saves time on the next fill. also the spin will not happen if it has not emptied completley. a faulty pump would give the same effect.

• Zanussi
• Zwf1621f fabric...
• This video will show you how to keep your soap draw clear and how to service the parts
  Please remember to subscribe to our YouTube channel for all appliance tutorials
  a 4 THUMBS rating is appreciated for answering your FREE question.
  
  

FJS1225W Front Load Washer This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

do not put too much liquid soap, everything will be ok

Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing Machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Washer dryers often have cold water valves with 3 separate solenoids. One for the main wash and rinses (which is clearly ok) and one for the condition rinse (to take the fabric conditioner down) which is probably ok too, and the 3rd one is for the dryer. It's possible this 3rd solenoid has failed.

Washer dryers need on a steady trickle of cold water running into the condenser chamber to convert the steam into water, which then gets pumped down the drain.