Question about Office Equipment & Supplies

1 Answer

Modixerox 5510 functioning

I Have modixerox 5510 and it copy very light even if i maximise the darker button suggest me solution so that i get bright and darker copy.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 53 Answers

Digital copiers will copy very light if the optics (mirrors, ccd lens) are dusty (opposite to the old analogue copiers which got darker) Clean whatever you can get at with a soft dry cloth.If it prints light from your computer then it won't be the optics, could be the ROS unit. If the ROS unit is dirty that's somewhat more complicated, the only bit you can get at is the ROS window, you'll have to pull the drum out and clean the glass window you can see from there

Posted on Jan 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Our copier is copying in light shade. how to make it darker

To adjust the default lighter/darker setting

1. On the LaserJet 3015, press MENU/ENTER.

2. Use the < or the > button to select Copy setup, and then press MENU/ENTER.

3. Use the < or the > button to select Def. Light/Dark, and then press MENU/ENTER.

4. Use the < or the > button to adjust the setting. Move the slider to the left to make all of the

copies lighter than the original, or move the slider to the right to make all of the copies

darker than the original.
5. Press MENU/ENTER to save the selection.

Page 48 of the User Guide has instructions for adjusting the light/dark setting during a copy job.

Also see the Troubleshooting section of the User Guide for other possible reasons for light/faded copies.

If your copies continue to come out too light, you may need to clean the insert a new toner cartridge or change brands of toner. I tried several "generic" toner cartridges and refills, but my prints and copies were always faded or streaky. After going back to genuine HP cartridges, I haven't had any print quality problems.

Jul 21, 2011 | HP LaserJet 3015 All-In-One Printer

1 Answer

Lost my user's guide need to change make copies darker

May I know the model # of your machine?
Some of brother machine have the copy options where you can change the brightness, contrast and color of the document that you are copying.
For example for MFC-240:
You can change the brightness contrast by pressing copy mode. Then load the document in the feeder, press copy option so that it will show the option to change the brightness, contrast and color. Just press the arrow key to select the brightness then hit ok/menu. then press arrow key to have it lighter/darker..
Hope this helps.

Mar 29, 2011 | Brother Office Equipment & Supplies

1 Answer

I have an Acer Aspire laptop 4810T. It turns on perfectly and everything appears on the screen but it is barely visible. The screen almost appears to be black.

It would seem that backlight for your screen is out. The light may be dead, have a poor connection, or your brightness may be down to zero. To see if the brightness is just low hold the function button "FN" and if you look on the left and right arrow keys there should be a Sun on each one. The left being brighter or filled in, the right darker or hollow. Press the left key while holding the "FN" button. Keep doing this to increase the brightness. If the screen doesn't get brighter there is an issue with the backlight. This is usually covered under warranty. If you still have a warranty contact Acer and they should repair your computer free of charge. If it is not under warranty you may need to replace the screen.

Mar 17, 2011 | Computers & Internet

1 Answer

I can adjust screen brightness in hp probook 4510s laptop

Typically there are two ways: through the keyboard, usually a function button and brighter or darker button, and 2nd in the power settings. Lower screen brightness gives much longer battery life.

Feb 14, 2011 | HP ProBook 4510s FM849UT Notebook

1 Answer


There should be a menu item or button that allows you to adjust the copier's brightness or contrast. The icons may be represented as a circle with half-white, half-black center, or as a circle with lines surrounding it, like a sun.

It would help to know your model of copier, or at least your manufacturer.

Jun 21, 2009 | Office Equipment & Supplies

2 Answers

Ink tone

Hi Pam -

This is a common problem with the CX 5000 - there is no contrast control (i.e., light/dark) like you would have on a photocopier. But if you use the scanning mode (EpsonScan) instead of the copying mode, there are a couple of alternative options that might help:

1) Brightness - in the EpsonScan program, in Home Mode, under Image Adjustments, there is a button labelled "Brightness." Depending on the colors and contrast of what you're copying, adjusting the brightness may help.

2) Color Restoration - In both Home Mode and Professional Mode, this feature is meant to restore the color to a faded photo - depending on the colors of your document, it may make the copy lighter or darker, but it's an option.

Hope this helps!

Dec 11, 2008 | Epson Stylus CX5000 InkJet Photo Printer

1 Answer

We cannot seem to make a copy darker??

i would suggest that 1st you do the auto gradation adjustment full adjust under add function /adjustment cleaning then under additional functions look for one that says printer settings you can adjust black density under that setting

Sep 26, 2008 | Canon imageRUNNER C3220 Color Copier

1 Answer

My monitor is getting darker by the day. rigth now i can't even see some the things it ois showing on the screen. please what are the problems and solution. so also is my flash drive doesn't let me copy...

most monitors get darker with age -- for a while you can counter this by turning up the Brightness and Contrast controls, but this only gives you a little extra time (and probably speeds up the decay process anyway).

for copy file check this one-------> CopyFile API

Sep 16, 2008 | Computers & Internet

1 Answer

Copy Quality

open lid press copy is scanner bulb bright white if not bulb is burning out or has burnt out

Sep 08, 2008 | Lexmark X7170 All-In-One InkJet Printer

1 Answer

Image adjustment functions

SHARPNESS - The function is to adjust sharpness of capturing images. CONTRAST - The function is to adjust contrast (distinction between light and dark) of capturing images. SATURATION - The function is to set color depth of capturing images. GRADATION - In this function, you can select the brightness of an entire image. It is suitable when you want to add a brighter effect to a bright object (Hi Key) and a darker effect to a dark object (Low Key).

Sep 04, 2005 | Olympus EVOLT E-300 Digital Camera

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

78010 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides