Question about Kenwood KDC-MP228 CD Player

1 Answer

TOC ERR for kenwood cd player

Every single cd i put in, it always says toc err and i cannot play any cd's.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers
Re: TOC ERR for kenwood cd player

Most likely optical pickup is defective. I may be able to get a pdf service manual if you wanted to try repairing yourself

Posted on Jan 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Toc err. And 05 when Trying to play CD .

Are they commercially made CDs or something someone made themselves?The commercially made ones - especially older ones may not have confirming ToCs. Home-made ones most likely don't have ToC - unless they were done with pretty sophisticated software. Some Car CD players have settings to ignor or display ToC, check your user manual or the manufacturer's web site.

Jun 23, 2014 | Car Audio Receivers

1 Answer

Cd player will not play cd's. Error code: TOC ERR

A few things it could be:

No disc has been loaded in the disc magazine.

CDs being used are burned, test using different media or an actual CD.

Very dirty or scratched CDs.

The CDs are upsidedown.

Sep 21, 2011 | Kenwood KDC-MP4028 CD Player

1 Answer

When I put a CD in i get a response as TOC ERR, but the radio works. No CD or MP3 works. Where do I take it for service in Hyderabad.

TOC error is not an error with the radio - it is telling you that a speaker is blown - or speakers wires are touching ground.

Inspect your speakers and wiring before sending out the unit.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Nov 28, 2009 | Kenwood KDC-MP235 CD Player

1 Answer


TOC is Table of contents, sounds like you have a dirty CD or
the lens needs to be cleaned. Take it in to a professional to
have him clean it. Good Luck

Aug 25, 2008 | Kenwood KDC-MP235 CD Player

1 Answer

Kenwood KDC-MP528 CD TOC ERR

Every one of those Kenwoods that I have fixed with that error needed the laser pick up replaced. so there is no easy fix for it.

If you have tried several disc's and they all have a TOC err, and you know the disc's are in decent condition, then you will need the pick up replaced.

First try cleaning the disc you are using. I use windex and a soft cloth like a bath towel, it works great at getting fingerprints and other stuff off the disc without scratching the disc. A bad fingerprint or a bad scratch right at the innermost part of the disc (where the TOC is located) will cause any CD player to not read the TOC, producing a TOC ERROR. you never know, you might get lucky.

Jun 17, 2008 | Kenwood KDC-MP528 CD Player

1 Answer


this is caused from the pickup needing to be cleaned(lazer) remove deck remove small phillips screw on top plate use a damp q-tip (alcohal) gently rub the lazer top with the q-tip allow to dry aprox 10min reasemble and enjoy. Also make sure u don't need a security code for your radio before u unhook the power plug!!!!

May 16, 2008 | Kenwood KDC-MP228 CD Player

1 Answer

E-99 and other times time TOC ERROR shows up.

hi TOC error sounds like its the laser is faulty. you could try a cd cleaning disc. this may cure the problem..



Feb 25, 2008 | Kenwood KDC-MP205 CD Player

1 Answer

What does toc err mean?

TOC is table of contents. Typically if its on a recorded cd try burning a cd from antoher computer and try it, if it works its most likely that your burner or software or ccd's your using are bad. Also is it a MP3 disc your trying to play? If so then you MUST burn it as a MP3 cd. You cant just burn MP3's to a CD and it read them. If this is the case thats why you are getting the TOC error because its not writing to the CD whats on the CD on the TOC area of the disc.

Sep 14, 2007 | Kenwood KDC-MP228 CD Player

1 Answer

Wont play recorded cd's

thats a "table of contents" error. Try using a different program to make your cds.

Sep 14, 2007 | Kenwood KDC-MP228 CD Player

1 Answer

KDC-MP228 cd no play w/ codes

Gave up on it and bought a pioneer. Kenwood said to take it in to a service center. The service center would have cost me more than the crappy stereo.

Jan 11, 2007 | Kenwood KDC-MP228 CD Player

Not finding what you are looking for?
Kenwood KDC-MP228 CD Player Logo

Related Topics:

1,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4679 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides