Question about HP LaserJet 1320 Printer

1 Answer

Hp laserjet 1320

Problem is ready go button and error led on
secondery error is ready and go button on

Posted by on

1 Answer

Re: hp laserjet 1320

Hold both key and power on and continue hold for 20 second,then relise

Posted on Jan 20, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hp laserjet 1320 toner empty?

you might try a recycled cartridge and have a lot less invested.Sounds like your cartridge is empty.Is print quality bad or light?

Mar 20, 2014 | HP LaserJet 1320 Printer

2 Answers

The Attention, Ready, and GO LEDs are on solid

Here is service manual for HP 1160/1320 series ->

Solution is on page 34. I hope it will help you.

Feb 27, 2010 | HP LaserJet 1320 Printer

3 Answers

Printer HP LaserJet 1320

You can download the driver for free from

Aug 19, 2009 | HP LaserJet 1320 Printer

1 Answer

Printer error


If all the three lights are on, then the issue is with the board (formatter board to be precise). Press the green button to check if there is a difference in the light pattern, the first light pattern is called primary light and after pressing the green button, the format changes to secondary light pattern, please find below the link to check the different light pattern for primary and secondary light pattern.

HP LaserJet 1160 and 1320 Series Printers - Printer Light Patterns (Error Messages)


May 16, 2009 | HP LaserJet 1320n Printer

1 Answer

Hp LaserJet 1320 Printer cannot Regnise Paper .

check ther eis not any paper jam .remove ink cartridge then refix it.

Jan 19, 2009 | HP LaserJet 1320 Printer

5 Answers

HP Laserjet 1320n Error Lights not in Manual

hi friends......
shivachadra is here.....just i faced this problem "Attention, Ready, and GO LEDs are on solid"
and i got solution in troubleshooting....just vi refixe the connetion of laser scanner........its the error of comunication between laser scanner and formatter....

May 27, 2008 | HP LaserJet 1320 Printer

2 Answers

HP Laserjet 1320 Printer doesn't respond

Manual Feed or Continuable
This state can be reached in
the following circumstances:
● Manual feed
● Out of paper for the
specified tray
● General continuable error
● Memory configuration error
● Personality/Job related

To recover from the error and
print whatever data is possible,
press the GO button.
If the recovery is successful,
the printer goes to the
Processing Data state and
completes the job.
If the recovery is unsuccessful,
the printer returns to the
Continuable Error state.

Feb 05, 2008 | HP LaserJet 1320 Printer

4 Answers

Hp laserjet 1320 problem

This is an error state that is not described at HP site.

Try to do a hard reset:

1) Turn off the printer

2) Press and hold down the green GO button

3) Turn the printer on and continue to hold the green GO button for at least 5 seconds, but not longer than 15 seconds. During the process, the Attention LED will turn on.

4) Release the GO button.NOTE: If both the Attention light and the Ready LEDs turn on before the GO button is released, the cold reset procedure must be started over at step 1.

5) The printer LEDs begin cycling. The cold reset process runs until completion and the printer returns to the Ready state.

Hope it will help you

Jan 24, 2008 | HP LaserJet 1320 Printer

1 Answer

Not printing

That would indicate a fuser error. You try leaving it unplugeed for more than 10 minutes and then pluggin it back it. If it continues the fuser will need to be changed out.

Jan 20, 2008 | HP LaserJet 1320 Printer

Not finding what you are looking for?
HP LaserJet 1320 Printer Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93861 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides