Question about Computers & Internet
I installed a samsung sh-s222L cd/dvdw and it takes 6 hours to burn on nero my old plextor only took 1 hour any suggestions
Check the DMA settings on your DVD device, usually found under Device Manager->Properties. It sounds as though DMA is OFF, causing this extremely long burn time. You could also check your BIOS settings for the Hard drive(s) and DVD devices you have installed. Make sure that DMA is enabled for all of them. You'll see increased performance when enabled and set to ON.
Posted on Dec 11, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
I would recommend trying a firmware update on the drive. What type of computer do you have? For example, HP has specific updates for drives at http://www.hp.com Otherwise, go to samsung.com and go to drives/downloads and search for what is called a "firmware driver" (firmware is software on the drive that will help it to either work better, or confirm you have a defective DVD drive.)
Nov 06, 2010 | Samsung SH-S182 DVD±RW Dual Layer Burner
Dec 11, 2009 | Computers & Internet
Oct 19, 2009 | Samsung TruDirect SpeedPlus DVD-RAM...
Jun 13, 2009 | Samsung (SH-S162L/BEBN) DVD RW Burner
Oct 07, 2008 | Ahead Software Nero 6 Ultra Edition...
Nov 09, 2007 | Plextor PX-716UF CD and DVD Burners
Oct 14, 2007 | Samsung (SH-S162L/BEBN) DVD RW Burner
145 people viewed this question
Usually answered in minutes!