Question about Emerson EWF2703 27" TV

1 Answer

Code remote code for emerson lc200em8

Posted by on

  • nickjjk Jan 20, 2008

    atlas dvr (day) 1055, universal electronics

  • tink812 Jul 27, 2008

    I am trying to program my ReplayTV remote so that it will be able to adjust the volume and turn off the power to my Emerson EWF2703 tv. I have tried all of the codes listed and none of them work. Any other suggestions? Is there a remote out there that will work both of these?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

What type of remote are you using? Thanks!

Posted on Jan 20, 2008

  • Jon Rutherford Jan 20, 2008

    It is one of these codes:

    0154, 0236, 0463, 0180, 0178, 0179, 0019, 0623, 0177, 0185,
    0282, 0039, 0280, 0038

    It varies with each set, even if they are the same model. Hope you got a few minutes to spare! Good luck!

    Here is how to set it up:

    1. Turn on a device and, if applicable, insert
    video media, (e.g., cassette or disc).
    NOTE: Please read steps 2 through 4 completely
    before proceeding.Highlight or write down the codes
    and device you wish to program before moving on to
    step 2.
    2. On the remote control, press a device key once
    (i.e.., AUX, DVD, AUD, TV, or CBL); it will blink
    once.Then press and hold SETUP until the
    selected mode key blinks twice, then release
    3. Use the Manufacturer’s Codes (starting on
    page 13) to locate the the type of device and
    brand name and then enter the first four-digit
    code for your device. If performed correctly,
    the selected mode key will blink twice.
    NOTE: If the selected mode key emits a long blink,
    the entry is invalid. Repeat steps 2 through 3 and try
    entering the same code again.
    4. Aim the remote control at the device and
    press PWR once. The device should turn off.
    If it does not, repeat steps 2 through 3, trying
    each code for your brand until you find one
    that works. If it still does not respond, try
    searching for the code (see Searching For Your
    Code on page 24).
    NOTE: If the device does not have a POWER key,
    press the (Play) key.

  • Jon Rutherford Jan 20, 2008

    Oh, and please rate me if this was helpful, thanks!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

NH305UD. How can I program it?

Universal Remote Control Codes - Emerson Instructions
Codes and links for a number of universal remote controls, including Sony, RCA, Memorex, Radio Shack, One For ... Emerson multi-brand remote codes for tv's.

Remote Control Codes For Emerson TVs ' Codes For ...
2 & 4 Digit Universal Remote Control Codes For Emerson TVs Emerson multi-brand remote ... How to Program a Universal Remote Control : Universal RemoteProgramming of TV ... Can you give me the code for Western digital TV box please.

Emerson brand TV remote codes - Comcast Help and Support Forums
May 22, 2010 - I have a Emerson TV model # BLC320EM9 A and I cannot find a ... ..... I can not get 11864 to work with the silver xfinity remote that has the ..... Code 11864 was not listed in the program guide.

Dec 25, 2015 | Emerson Televison & Video

1 Answer

Need Code for LC200EM8

Three digit remote codes for Emerson TV are:-

004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038/ 039/ 040/ 041/ 042/ 043/ 045/ 046/ 049/ 053/ 116/ 135/ 147/ 177/ 179

Four digit remote codes for emerson TV are:-

0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037

Switch ON- and OFF the TV by its front panel power switch [not by the remote handset] each time before trying an other code.
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Dec 19, 2010 | Emerson EWF2703 27" TV

2 Answers

We have a RCA remote and need the codes for an Emerson TV. Can you help?

The codes to program an RCA RCU300WBL remote control for an Emerson TV are:

Code 004 for Emerson TV Code 006 for Emerson TV Code 012 for Emerson TV Code 023 for Emerson TV Code 025 for Emerson TV Code 026 for Emerson TV Code 029 for Emerson TV Code 030 for Emerson TV Code 033 for Emerson TV Code 035 for Emerson TV Code 036 for Emerson TV Code 037 for Emerson TV Code 038 for Emerson TV Code 041 for Emerson TV Code 042 for Emerson TV Code 043 for Emerson TV Code 046 for Emerson TV Code 047 for Emerson TV Code 048 for Emerson TV Code 049 for Emerson TV Code 073 for Emerson TV Code 123 for Emerson TV Code 162 for Emerson TV Code 171 for Emerson TV Code 177 for Emerson TV Code 179 for Emerson TV Code 191 for Emerson TV
If you have a different RCA, remote control you can post more details, or take a look at the RCA Code Finder Website at:

Aug 08, 2009 | RCA RCU300WBL Remote Control

1 Answer

Remote control code for Emerson LC200EM8

Have you tried the searching for your code option on the 15-2147?
for example, turn on your Emerson LC200EM8( press the appropriate key on your remote, if this is a the tv key on your remote)..#2.Press and hold the little 'p' key till the LED lite,on the remote, blinks twice..#3..then enter 9 9 1.(the led should blink twice).#4.Aim and..Press the Power off on the remote....(the remote will start sending IR codes from its library to the selected device, starting with the most popular.)#5..If the TV responds go to step 6..if not, press the CH+ button, until it does...step #6 when device responds, to lock in the code, press 'p' once, the LED blinks twice.
Once you have your number locked in,,,you can get the remote to tell you what sequence the code is in by #1Press the appropriate key on the remote.(i.e, TV press the TV key ....Dvd player or VCR, then press that key). (Note: make sure you are aiming the remote at the device so the IR(infrared) enters the device.) Step #2 Press and hold the 'p' key(upper right corner of controller) until LED blinks twice, then release....Step #3 enter the code 9 9 0 ..the LED lite blinks twice. ..Step#4 to get the first number of the code press th e number 1 on the controller...the LED will blink the once for 1 //twice for 2...three times for3...etc...write down how many times the LED blinks(if it doesnt blink the first number of the code is 0) Repeat step #4 to get the remaining numbers, i.e. for the second mumber of the code enter 2...third number enter 3...till you have all four numbers.( when done you can press a different device key to get you off... then press the right device key for your device to operate it remotely. Hope this helps

Aug 31, 2008 | Radio Shack (15-2147) Remote Control

2 Answers

Need codes for rca universal remcon to emerson vcr and need codes for emerson vcr and coby 224 dvd

Try these codes for the emerson:

Code 003 for Emerson VCR Code 007 for Emerson VCR Code 012 for Emerson VCR Code 014 for Emerson VCR Code 015 for Emerson VCR Code 021 for Emerson VCR Code 024 for Emerson VCR Code 025 for Emerson VCR Code 026 for Emerson VCR Code 029 for Emerson VCR Code 031 for Emerson VCR Code 032 for Emerson VCR Code 033 for Emerson VCR Code 038 for Emerson VCR Code 041 for Emerson VCR Code 054 for Emerson VCR Code 065 for Emerson VCR Code 116 for Emerson VCR Code 130 for Emerson VCR

and I wasn't able to find any for the dvd player :/

Jun 13, 2008 | RCA Universal Remote Control

1 Answer


Hi...Need rca universal remote code(s) for emerson tv. Can you help?

Mar 23, 2008 | Televison & Video

1 Answer

Remote Code for Emerson LC200EM8 LCD HDTV 20 inch

sony RM-VL600 remote, can be programmed remote to remote...I bought it, it works.

Dec 29, 2007 | Televison & Video

Not finding what you are looking for?
Emerson EWF2703 27" TV Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74999 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers


Level 3 Expert

5318 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides