Question about Zenith DBZN-311 Remote Control

1 Answer

Lost tv codes

I am trying to program my dvd panasonic player with my zenith control but lost my code book can you help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: lost tv codes


Posted on Feb 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

ZC800 program codes for EMERSON T.V

go to www. or www.

God bless yu

Jun 20, 2012 | Zenith ZC800 Remote Control

2 Answers

I have lost the book to code a Zenith TV Could you help me find the code Please? I had it coded to another TV which died so now have a Zenith & now I cant find the book on how to code the Universal...

I couldn't find the manual for the remote you specified, however, as long as it is a Philips remote, you should be able to use any manual to find the code. If you know how to program the remote but just need the codes, you can get the codes here:"H15022.pdf"

Dec 20, 2010 | Philips 313923812851 Remote Control

2 Answers

Can you help me program my remote?

hi i have a philips universal a rca tv and a dvd named lennox sound 2003 i want to program the dvd with the remote please help no codes lost

Feb 09, 2009 | Philips Universal PH301S Remote Control

1 Answer

Lost the manual for programing codes

I need to know if there is codes for a 5 disc changer dvd player that is Durabrand model

Oct 08, 2008 | RCA RCR311B Remote Control

1 Answer

Codes for my koss dvd player

I need the numbers for symphonic tv and memorex dvdplayer thank you

Sep 09, 2008 | One For All URC-3021 Remote Control

2 Answers

I need codes for philips universal remote control

lost manual tring to hook up dvd/vcr emerson up need code

Apr 24, 2008 | Philips Universal PH301S Remote Control

4 Answers

Unable to tune in generic remote control

I have the code book for this remote.  I am having difficultly with my Sharp CD player.

Codes for panasonic tv 0011,0024,0032,0106,0118,0131,0139,0212,1083,1140

codes for pioneer dvd

hoped this helped someone

Dec 29, 2007 | Universal Remote Control Remote Control

4 Answers


The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device

Here is a link to your manual:

Nov 26, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
Zenith DBZN-311 Remote Control Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Remote Controls Experts

andy williard
andy williard

Level 2 Expert

226 Answers

The Knight
The Knight

Level 3 Expert

66623 Answers

alexander woolfolk
alexander woolfolk

Level 2 Expert

276 Answers

Are you a Zenith Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides