Question about BenQ Graphics G774 (White) 17 in.CRT Conventional Monitor

1 Answer

No Signal My BENQ G774 Computer Monitor has been flashing, changing colours and occasional stripes for the last couple of weeks. i tried to take out the connection with the PC and place it back in. It is now blank, coming up with a "No Signal" sign on the screen and the light is orange.' When i tried to change it over to my laptop it worked perfectly so it is not the connections... any ideas would be greatly appreciated

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 139 Answers
Re: No Signal

If the monitor works ok with your laptop, the video graphics adapter in your computer may be defective.

Posted on Jan 20, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to fix my Benq Monitor which is scrolling full screens of different colours.

all modern LCDs have ONE and ONE only native screen size. since you did not tell us the model number we have to tell you maybe you are setting the wrong size. if the monitor has worked before then you are sending it the wrong signal.

Jul 25, 2016 | BenQ FP91V (Silver, Black) 19 inch LCD...

1 Answer

~Hello! My monitor dispays picture, but the picture isnt like it should be. Instead of normal colours it displays gray stripes, red is shown as yellow, windows 7 startup icon is in black box ect. When...

Hey, have you bene able to try another monitor and see if its the same thing?

Check andmake sure that all of your cables are tight and secure. If they are then you probably have a bad video card. they are fairly easy to replace:

Jul 15, 2011 | BenQ FP737S-D 17" LCD Monitor

1 Answer

I bought a Lenovo S10e last week, for my mum, the monitor was to small for her, so today I bought a Benq g2220hd monitor, problem is that I dont get a signal on the Benq monitor, I did get the windows logo...

first i would check the compatibility of the monitor to the laptop and see what they say, and if it should work odds are the monitor will have to be set manually through the laptop itself or on the menu of the monitor itself, may take a while playing cat and mouse but im sure you will get it, more then likley from what im understanding its a resolution issue between the monitor and the laptop, especially if you got the windows logo on the boot


Jul 06, 2009 | BenQ Computer Monitors

1 Answer

BENQ FP737S Monitor shows "No Signal Detected" on startup

first problem could be the hdmi cable you are using is loose or broken.second, the display mode you selected was wrong, try to go to desktop and right click and choose nvdia control panel and choose the nview display mode to use,select the only use one display(single)and apply.

Jan 27, 2009 | BenQ FP71E 17" LCD Monitor

1 Answer

Black screen monitor

souns like the dc-dc convertor board that supplies the backlight gone faulty possible poor soldering on board

Oct 07, 2008 | Mag Innovision LT782S 17" Flat Panel LCD...

1 Answer

BenQ FP94VW LCD Monitor

1. If possible RESET the setting from monitor.
2. Change theme from Operating stystem
3. If possible check monitor some other system for monitor's problem if colour problem persist may have to appraoch service center for solution

May 25, 2008 | BenQ FP791 17" LCD Monitor

3 Answers

Benq monitor flashes primary colours when switch on or off

This is called burn-in mode. Used to test the monitor at the factory.
To fix this, use the buttons under the front of the monitor,
There are six buttons. Let's number them 1 to 6 from the left.
Press 6 to display menu (at the bottom in Red will say Burn in mode on)
Press 4 or 5 until Recall is highlighted
Press 6 to select
Press 4 or 5 until Recall All is highlighted
Press 6 to select
Press 4 or 5 until Yes is highlighted
Press 6 to select
Press 3 to exit
This will reset all paramaters and also turn-off burn-in mode
If you want to reset some parameters to your preferences, press 6 again to bring up menu and
see you user guide to get explanations for the different settings.

Dec 10, 2007 | BenQ FP71E 17" LCD Monitor

1 Answer

Monitor calibration

In the menu, goto colour temp settings and adjust as needed.
The last item (from memory here) is an option to reset the monitor back to factory defaults, you could try that also.
Hope that solves your issue.

Nov 30, 2007 | BenQ FP72G+ 17" LCD Monitor

Not finding what you are looking for?
BenQ Graphics G774 (White) 17 in.CRT Conventional Monitor Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts


Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides