Question about Compaq iPAQ H3630 Pocket PC

1 Answer

I have an ipaq 1950 but i cannot use it!!! can anybody helpme? when i start it, appear in the screen the aligne step... but stay on that forever... what can i do to go on to next part of the setup.. thanks alan

Posted by on

1 Answer

Re: I have an ipaq 1950 but i cannot use it!!! can...

It is ovbvious from the Picture that your screen is cracked. You will not be able to comlete the alignment without fixing that first. Contact HP or a local HP repairer

Posted on Feb 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do the align hp ipaq 112 screen

go to start-settings-system-screen & Align Screen click it there is a + on the screen touch it 4 times where it appear

Jan 18, 2011 | HP iPAQ 112 Classic Pocket PC

1 Answer

Touchscreen not reacting to stylus but the buttons work ok

  1. urn on your HP iPAQ Pocket PC.
  2. Use your stylus to tap on the "Start" menu.
  3. Tap on the "System" tab.
  4. Tap the "Screen" icon.
  5. Tap the "Align Screen" button.
  6. Tap the center of the cross-hair object carefully at each location as it moves around the screen.
  7. Tap "OK" to complete the screen alignment.

Mar 28, 2010 | HP iPAQ rx5915

1 Answer

Align screen on IPAQ

Tap the target firmly and accurately at each location on the screen.The target will continue to move until the screen is aligned,
pls help.what can i do.

Jul 23, 2009 | Compaq iPAQ H3955 Pocket PC

1 Answer

PIM ino lost from ipaq 1950

did a hard reset. booted up ok. did activesync with my other PDA onto computer and then sync'ed with 1950.

Dec 01, 2008 | HP iPAQ rx1950 Pocket PC

1 Answer

Pass the align screen

Hey :), id be happy to help. You see, I too have a Ipaq except I had Ipaq 4350. Now, I too had the same problem you are having. The reason why you can't pass the align screen step is because somehow you have damaged your screen. And I have come to the conclusion that HP Ipaq's screen is extremely sensitive, ( because I never did anything that bad to my screen for it to be damaged) soo I'd recommend for you to call HP and see if they can repair your problem or give you another one. Thank you and I hope this helps!

Sep 03, 2008 | HP iPAQ H2210 Pocket PC

1 Answer

Stuck on "align screen"

your touch screen gone just change your touch screen it goes back to normal

Mar 20, 2008 | HP iPAQ H6300 Pocket PC

1 Answer

IPAQ rx3115 continuously, "screen alignment",

If I understand correctly your problem, the touch screen of your PDA is not working.

Well, this is a common IPAQ failure. When happens, the only options to repair it are:

1. Soft reset of the PDA. If still does not work, then go to next step.

2. Replace the top digitizer glass.

It requires a very skillful person to do it. If you have not experience with fixing electronic devices, then I do suggest you to send it to repair.

Besides that is necessary to open it, you will require a soldering iron, and desolder the digitizer part and remove it from the LCD screen, which if is not done properly with the right tools, it's easy to damage the LCD screen assembly.

Also, if it's not opened right, is possible to damage permanently the mainboard if is bent or warped.

Also, even though there are a lot of cheap digitizer replacement parts on-line (mainly from China), they have a compatibility issue that prevents to use them in the RX3115 (or RX3715) PDAs.

I have nothing against Chinese manufactured parts, but after buy around 10 digitizers in the last couple of years for different Ipaq PDAs, I found out that only 3 worked fine, so I know what I am talking about.

Best regards,

Feb 26, 2008 | HP iPAQ RX3115 Pocket PC

1 Answer

Ipaq rx3115 frozen

Red LED light means a major problem at the charging of the battery.

You have several options to repair it:

1. Leave several hours the PDA with not battery and unplugged from the AC power adapter, then put the battery and leave charging it.

It's more likely that the red light will appears again, but leave plugged it. Sometimes will start charging and blinking with orange color after 30 minutes or so. After that, it will work normally.

2. Use other good working battery to test it.

3. If the above two steps fail, then there is a good chance that the mainboard has a problem, and needs to be fixed or replaced.

Best regards,

Jan 25, 2008 | HP iPAQ RX3115 Pocket PC

2 Answers

Rx1950 freeze on soft reset

You can do a hard reset by doing the following...

01) Press and hold down the "Calendar" and "iPAQ Wireless" buttons.
02) While holding down these buttons, use the stylus to lightly press the "Reset" button/hole on the back of the iPAQ until the screen goes blank.
03) Release the "Calendar" and "iPAQ Wireless" buttons.
04) Press the "Reset" button/hole again (so that it resets/powers on.)

Nov 01, 2007 | HP iPAQ rx1950 Pocket PC

3 Answers

Ipaq RX 3115 Stops at align Screen

solia, I'm sorry, I didn't mean to close the chat session on you.
Is your unit still under warranty? If so, check with the manufacturer.
They can help.


Sep 27, 2006 | HP iPAQ RX3115 Pocket PC

Not finding what you are looking for?
Compaq iPAQ H3630 Pocket PC Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq PDAs Experts

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers


Level 1 Expert

45 Answers


Level 3 Expert

1172 Answers

Are you a Compaq PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides