Question about KitchenAid Superba Architect KSCS25INSS Side by Side Refrigerator

1 Answer

Contol on light blinking, kitchenaide front loading automatic washer, two years old

I have reset, plugged and unplugged, checked the circuit breaker, all OK. I want to override this darn blinking light! Washer ran fine this morning. There is no load in the washing machine. I haven't the foggiest idea what to do, it is a holiday weekend, and I have laundry to do! And it is 24F degrees with flurries predicted! HELP!

Posted by on

  • 1 more comment 
  • Fudgepuddin Jan 20, 2008

    rlbstein: thank you for posting to me. I was helped by tech17. His instructions to me allowed me to fix it myself and start my laundry. The on control light was blinking. I had checked the plug, the circuit breaker, and pushed the control/off twice per the troubleshooting manual. I had doublechecked my dispenser door to ensure it was closed. tech17 had me close the door to my front loading machine rather hard; that solved the problem. He advised me that sometimes the lock/latch don't match up, which causes a problem. If you other input, please post it. To me, this is a sensitive washingmachine. Probably because it is my first computer washing machine. but the pair cost me a cool three grand two years ago, and I am not sure that I spent my money wisely. Overall, I find their performance stellar. However, I have to be very, very careful and remember to maintain the monthly cleaning schedule or performance is hindered noticably. I average seven loads a week, to include one of only sheets, and two of only delicates, no heavy duty dirty stuff or heavy stuff. Again, any words of advice are welcome. Thanks.

  • Anonymous Oct 27, 2008

    Hello, i have the same problem with my washing machine. It's SEG W1047 D.1 (hopefully there somebody using the same product). 2 days ago, we're using the machine to wash baby stuff, but seems there a belt which twist another stuff, so the machine stop and blinking. Then we unload all the stuff and try to spin the machine using spin program to remove the rest of water that still there. But the machine only blinking and can not start. We have turn off the electric (try to reset the program) but still, it can not start the program we choose, instead of it, the light is blinking..

  • Rob Breitenstein May 11, 2010

    You posted this under a refrigerator heading but your talking about a washing machine. If you give some info on the washer I may be able to help you.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 379 Answers

Obviously there is an issue, perhaps a safety issue.
Suggest don't over-ride anything.
Check your owner's manual to see what blinking light indicates.

Posted on Nov 02, 2017


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 146 Answers

SOURCE: Kitchenaid Superba top load washer not working

You have a lid switch and bracket. Most likely it is one or the other.

Posted on Dec 18, 2007

  • 236 Answers

SOURCE: contol on light blinking, kitchenaide front loading automatic washer, two years old

if this is a flash fault code consult your manual to see what the code is telling you then relist the code for some more advice.

Posted on Jan 20, 2008

  • 3740 Answers

SOURCE: Had electrical prob. blew some breakers for

Hi and welcome to FixYa. I am Kelly.

With electronic controlled appliances today and in this case your dishwasher. The printed circuit board (PCB) transformers are very susceptible to power surges. The windings are just large enough for the normal operational voltages. Anything above or below that range causes the windings to fail rapidly. When they fail you do not get the 5V or 3.3 V for the LEDs ' and IC chips or the 12V for the controlling the relays for normal operation.

I don't see a model number listed for your dishwasher so I can not provide the replacement part information at this time.

Before I went into the parts changing mode I would first go back and reset every breaker in the house by:

1. Pushing each breaker with conviction to the OFF position. This completely resets the breaker.

2. As you turn each of the breaker ON push hard on the face of the breaker near the center of the main panel to ensure it remains connected / engaged to the main power buss bar.
Then go back and check the dishwasher for signs of life. If it works great! If not.... I will be watching for model number information if you need help with the dishwasher control parts information.

Just a side note... you may want to check your home owners insurance coverage (if your a home owner) to see if it covers repair of equipment other than the one that caused the original problem.

Thanks for using FixYa.


Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Is there a fuse or circuit breaker within this washer? where?

if you try to fix it your warranty is void. so ring them and let them fix it .sounds like the main board is shot

Aug 10, 2014 | Kenmore HE2 Plus Front Load Washer

1 Answer

Start button doesn't work on King Size Washer

Are there any lights on at the washer? If not check the washer circuit breaker in your house main circuit breaker/service panel. If it is tripped reset it and try start button again. If it trips again you need a service call. If there are lights on try turning the washer main knob to off and unplug the washer from the wall outlet...wait 10 seconds then plug in and try start button again.

Mar 16, 2014 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Fridgeadare front loader lights keep coming on. I hit cancel and they come back on in a minute or so

Good Afternoon Rosemary, thank you for your question. Let's try resetting the unit by either unplugging it or flipping the household circuit breaker to the off position. Wait roughly ten minutes and turn on the washer. Select a normal cycle and verify if the washer lights continue to blink/flash. If resetting the power does not correct the issue, your appliance could be experiencing a communication error with the control board or could have a wiring failure. I would suggest contacting an experienced service technician to determine the precise cause.

Aug 27, 2013 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Why does the dr light keeps binking

Hello Gene Frank - Typically error code DR indicates an issue with the door switch and wiring not communicating correctly or closing properly. Try resetting the washer by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and if it proves to be ineffective, contact a professional to move forward accurately.

Nov 30, 2012 | Frigidaire ATF6000ES Front Load Washer

2 Answers

LG Washer wont start, no power

Make sure there's power getting to the washer. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power. Sometimes the power cord disconnects at the washer, if this is the case, the wiring must be repaired or replaced.

Jun 21, 2009 | LG WM-2277HW Front Load Washer

1 Answer

No power

No error code like PF Some times unplug for 2 6hours for it to reset.

Jan 13, 2009 | LG WM-2277HW Front Load Washer

1 Answer

Washing machine suddenly stopped working during cycle

Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

Jan 01, 2009 | Kenmore 3.5 cu. ft. Front Load Electric...

1 Answer

Contol on light blinking, kitchenaide front loading automatic washer, two years old

if this is a flash fault code consult your manual to see what the code is telling you then relist the code for some more advice.

Jan 20, 2008 | KitchenAid KHWS02R Front Load Washer

Not finding what you are looking for?
KitchenAid Superba Architect KSCS25INSS Side by Side Refrigerator Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers


Level 3 Expert

1214 Answers


Level 2 Expert

106 Answers

Are you a KitchenAid Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides