Question about Televison & Video

2 Answers

We have a Magnavox, 50 inch plasma TV, model 50MF231D/37. Recently when the TV is powered off and an attempt to power it back on again has been made, we get a red blinking light. The light blinks six times. We have unplugged the TV until the blinking stops and then are able to turn it on again, but I don't know what is causing the problem initially.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 834 Answers

Your problem is caused by a power supply issue it sounds like a capacitor is leaking or has vented and will need to be replaced if your comfortable you could check the power board for a can shaped electroletic cap that has vented it will be puffed up on the top the value is printed on the side you can or have someone replace it that should take care of your problem the power board is the one where the AC cord plugs to or leads to

Posted on Dec 10, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,003 Answers

Replace your power supply board!

Posted on Feb 03, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the Blinking Light on the Asic Main logic board mean bad Logic Board?


Check all the capacitors one might be bad find out if it is bad it should bulge on top of the capacitors

Nov 04, 2017 | Magnavox Televison & Video

2 Answers

Magnavox plazma 50 inch flat screen wont turn on


Power supply board is dead.Replaced the power supply board will solved this problems.Tries Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Mar 08, 2010 | Televison & Video

1 Answer

I have a 50' Plasma HDTV and when I turn it on


First thing to try is replace any swollen capacitors on the power board.

Nov 01, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

2 Answers

Philips 50 Inch Plasma Model 50PF7320A/37 will not turn on


Commonly it's going to be a power supply related problem. The two boards that need to be looked at is the Main Power Supply Board or the power supply board for the screen. The one that powers the screen, some manufactures call it a Backlight Inverter Board.
If you have some electronic experience, you can sometimes find a Service Manual for the TV over the internet for less than $20. It will have the all resource material for repairing your TV model. It's just the matter of replacing the bad part on the circuit board.

Aug 12, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

I had two capacitors in my 50mf231d/37 50 inch plasma tv go out.


your problem is in the Y or Z sustain boards i just fixed one of this today with the same exact problem and i replaced  the Y sustain BINGO.
good luck 
caypianan@yahoo.com

May 12, 2009 | Samsung HP-S5073 50 in. Plasma HDTV

1 Answer

Tv wont turn on


Switch off the surge protector for 2-3 minutes then switch back on and TV should work.

Feb 19, 2009 | Philips Magnavox 27MS343S 27" TV

14 Answers

50" Magnavox Plasma TV will not turn on - Red LED blinking 4x


When you have the red light that blinks four times on the 50" Magnavox Plasma Model 50MF231D/37, you should look for the capacitors on the power board in the center of the of the TV. Look for two 3300uf, 10V, 105c capacitors that have a build up of pressure that has caused the top of the capacitor to look rounded instead of the flat top that will be on all of the other capacitors. Changing these two capacitors fixed the problem of the TV not coming on.
I had more trouble finding the capacitors than changing them. I could not find them locally so I went to an on-line electronics supply store where they were $1.65 each and $8.99 to ship.

Jan 03, 2009 | Akai PDP4294 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,002 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75304 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5381 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...