Question about Washing Machines

1 Answer

I have removed the print board on my wma36 hotpoint aqurius washing machine and i may have a plug in the wrong place as it now wont spin i need a wiring diagram please

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 704 Answers

Hello Ward,

You didn't provide a complete model number, but if you check the tag, you should find some other digits and letters. Once you have the complete model number, you can go to and enter it in and then take a look at the wiring schematic provided.

I'd donwload it (free) and print it out so you can more easily follow the color codes for each wire and termination point. Once you done that, give it a try, if it doesn't work, you may have shorted out the control board and may have to replace it at this point. But let's hope it works and you're all set again!

Hope you find this Very Helpful and best regards!

Posted on Dec 10, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need an instruction manual for Hotpoint WMA36 Washing Machine

Here is a link to the page you need.You will need the model number.

May 13, 2011 | Hotpoint WMA32 Front Load Washer

1 Answer

Our hotpoint aqurius wont rinse properly on its last cycle it doesnt empty properly

Most probably the pump has partially or completely siezed/failed.

Early machines had the pump in a position where condensation dripped on to the motor and over time caused the motor to seize.

Never worked on a modern Hotpoint but I suspect even if not due to the same cause, pump not running is your best bet.

Sep 07, 2009 | Washing Machines

1 Answer

Washing machine won't spin

This site should help -

I am thinking moor brushes, but it could be any one of 3-4 different problems.

Jan 28, 2009 | Washing Machines

1 Answer


hi, i just wanted to know where the fuse is for a hotpoint washing machine, cheers

Oct 28, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

I have a Hotpoint WMA36 washing machine that the drum won't spin during the cycle. Even when I put it on spin only it does'nt move, do the brushes need replacing

quite possibly. the only way to check is to check continuity across the brushes or if you don't have a multimeter, take the brushes out and examine. brushes are held in by two screws each. it is a bit arkward with the motor in situ so you may find it easier to take the motor out

Jun 22, 2008 | Hotpoint Washing Machines

2 Answers

WD440 conditioner inlet /outlet appears blocked

Hotpoint WMA36 Washing machine This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 06, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

83083 Answers

Brad Brown

Level 3 Expert

17490 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides