Battery won't charge on my vivicam 8025 when i turn it on it goes to a blue screen with msdc in the middle and i can't go anywere at that point

Try to go thru menu and do a factory reset?

The MSDC indicates that the camera has recognized it's connected to a computer.

The red light indicates that the camera's battery is charging.

It is charging by USB port using ac adapter, can also charge by computer USB port during picture uploads and downloads. Do you need an instruction manual.

The MSDC simply tells you that the camera is connected to the computer. In order to use the camera to take pictures, you have to disconnect it from the camera.

Make sure the battery is in the camara correctly. I had the problem with the blue screen and MSDC showing and it would not hold a charge. the battery has to be in correctly. It will go in wrong and look right so match up the silver three marks on the battery to the three marks inside the camara where the battery goes. It worked after i did that. Hope this helps!!!

My roommate had the same problem, pretty easy to fix. Make sure your memory card and battery are all the way in and they should lock. If you lost the booklet, the positive/geative signs should be on the bottom right when sliding it in.

The blue MSDC screen simply tells you that the camera is connected to the computer. To use the camera, disconnect it from the computer.

Try flipping the battery over (where the metal connectors are pointing down).

i keep geting msdc on blue screen on my viviar 8025 vivicam can you help thanks mal

You should only get that screen when it's charging on the wall charger or when it is hooked up to your computer via the USB cord.