Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)

5 Answers

How do I secure my dlink wireless connection?

Currently I am connected dlink WBR 1310 wireless setup. How do I proceed to secure connection?

Thanks!

Posted by on

  • 3 more comments 
  • ncalayan May 23, 2008

    hi. i tried the instruction given, but still when i look at the status, encryption is still disabled. when i enter again the ip address, the settings that i saved is gone. i'm not sure, but it seems that the save button is not working.



    thank you.

  • Anonymous Oct 19, 2008

    how do i secure the network

  • CLUGAR Nov 11, 2008

    Can't find IP Address (198.168.0.10

  • Anonymous Jan 21, 2009

    I can't access the web interface (even though I changed all my settings as instructed in the manual), and the emulator does nothing when I click 'Save Settings'! Help!

  • khris0330 May 16, 2009

    I'm basically providing free internet to my whole neighborhood. How do I put a password on my wireless Router?

×

Ad

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 689 Answers

Type 192.168.0.1 (you can type the router address if you have changed) and enter on browser's addressbar. Router's interface will appear.
Click on SETUP and Click on the WIRELESS SETTINGS at left side. on the page you will see the option of WIRELESS SECURITY by drop down menu you can choose the Security mode that you wish. here is the link for the emulator
http://support.dlink.com/emulators/wbr1310_revB/wireless.htm

Please post your question if you need further assistance
Good Luck

Posted on Jan 19, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Here's what worked for me:

1. Reset router password by holding reset button for around 10 secs, unplug, plug back in
2. Type 192.168.0.1 in browser, login using admin, no password.
3. Follow internet connection setup wizard, this will take you through encription steps.

Posted on Jan 26, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How i change my password for wireless connection?

Posted on Nov 13, 2008

How do I secure my connection with D-Link DIR-615??????

Posted on Jan 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem, I can't save my wireless setting. wtf Dlink.pls help me

Posted on Oct 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to secure my wireless connection network. I have a iMac computer an a Dlink WBR 1310. How do I configure a Password to prevent intruders from using my connection?


First you will need to find the local IP address of your router. It should look something like "192.168.0.1" You might be able to find it in either your router manual or on the bottom of the router itself.
Then make sure your computer is connected to the router via wireless or ethernet cable.
Next, open your browser and type in the IP address into the address bar. It should take you to a setup page that looks a lot like a website. Find the "wireless security" tab and select a security protocol. I recommend using either WPA or WPA2. Now you can set a password. Finally, there should be "save" button on the page. Click it, then wait for your router to reboot and your network is now secure.

Jul 31, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

My WBR-1310 keeps losing connection every 10 mins or so. Is there a fix I can download to my router? (like an update or something)


Hi,
I got your issue, since your facing the frequent disconnection in the internet connection,

ftp://ftp.dlink.com/Gateway/wbr1310/Firmware/wbr1310_firmware_104.bin.

Please download the firmware using this link and log into the router setup page of DLink with 192.168.0.1 and update the firmware

I'm sure this will help you to fix the issue.

Thanks & Regards,
Prema

Oct 09, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Unsecured network


  • You need to log into the router setup screen - you do this by connecting a PC to the Router via a cable connection and then using Internet Explorer (IE) you log into the router.
Using the default settings
  • Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to admin and leave the password box empty. Click OK to continue.
  • Goto the Wireless security section to set the security type and the password
Section 4 of the manual - see below deals with setting the wireless security This is the support site for that router http://www.dlink.com/products/?pid=WBR-1310
Click on the Support Resources - that will take you to the manuals for different Version of that model - click on the model you have to get to the online manual

Apr 09, 2010 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

My WBR-1310 doesn't do wireless to my laptop.


theres a couple of version of this router http://www.dlink.com/products/default.aspx?pid=WBR-1310&tab=3 I'm using the manual from here http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310
on a working PC download and install this program http://www.xirrus.com/library/wifitools.php this will detect all the wireless signals being broadcast - see if the router is actually broadcasting - if it is detected on your PC then it may be that 1) the firewall is blocking access or 2) the security code is entered wrong - -log into the router and remove the wireless security and see if you can now detect

Mar 18, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Have a Dlink wireless router, however I am unable to set up a wireless connection. ssid=unknown, additionally all other data other than p/n, s/n ip:192.168.0.1, pass=ADMIN. I have a wireless laptop, hp...


theres a couple of version of this router http://www.dlink.com/products/default.aspx?pid=WBR-1310&tab=3 I'm using the manual from here http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310
you should be able to loginto the router and setup the wireless - if you are not able to login - you may need to do a factory reset and then login using the default settings and reset up
a useful tool for detecting wireless networks is this http://www.xirrus.com/library/wifitools.php you can use this on the PC to see if the wireless is broadcasting, if you can detect it on the PC

Mar 18, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have a dlink dkt-110 and have no idea how to secure it without loosing it


Are you trying to secure the wireless network then you will need to access the router setup.
Is there any computer connected to the router?
If not then you will need to connect the computer to the router.
once you open to the router setup, you will see the option of secure the network.
Click here for more info

Dec 03, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I HAVE A DLINK WBR-1310 ROUTER WHERE DOES THE BLUW


Hi!

You can use any UTP cables. Here is how the connection would look like:

DSL -> DLINK WAN PORT
DLINK PORT 1(or any other ports) <---> COMPUTER

If the router is set to give out IP addresses automatically(DHCP), you should be able to connect flawlessly.

Oct 25, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

D-LINK WBR 1310 ROUTER


Go the router setup page, 192.168.0.1, type admin as the user name and password as the password (default, if you have changed these use your login info).
Then on the wireless page change the SSID (router name).
You can also add a security key on this page.

http://support.dlink.com/emulators/wbr1310_revA/wireless.htm

more info from D-Link:

http://www.dlink.com/products/support.asp?pid=474&pv=96&sec=1

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 12, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Dlink WBR 1310 error 109 internal error


Remove the CD setup. Try calling your Dlink Manufacturer to help you install the WBR-1310 manaully.

Jan 03, 2009 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

14,449 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...