Question about Curtis CM25101S 25" TV

Open Question

Curtis mathis TV

TV works for a while, then looses the picture.  the sound stays on and then it gets garbled
a few times I hit the TV, and it went back on,  but now it remains black... seems to be related to power,  it looses power or strength ...    can I fix it? Can I take it somewhere to fix it reasonable inexpensive
I just bought it used,,   its modle number says 2002, so its6 yrs old

Posted by on

4 Suggested Answers

  • 3130 Answers

SOURCE: Curtis Mathis TV

Not a lot of info your giving us, but what it sounds like is the closed caption is on. Take the remote and there should be a button on the original remote unit, or the closed caption is controlled by the menu. Good Luck

Posted on Sep 05, 2007

SOURCE: no audio

i would be looking for electrol capacitors near the audion chip or audio amplifier

Posted on Feb 15, 2008

  • 1 Answer

SOURCE: curtis mathis universal control code for 13 in tv cm13102

We also bought a universal remote to program a Curtis Mathis TV. We found the code by using the code search method. It works everything but the channel program feature. Does anyone know how to access that? BTW the remote is a GE 24921. Thanks

Posted on Apr 26, 2008

  • 4090 Answers

SOURCE: Philips universal remote needs code for Curtis

Try these

Curtis Mathes
0047 0466
0016 0054
0060 0093
0145 0030
0154 0451

Please rate my help++++Thanks for using FIXYA

Posted on Jun 09, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

I have a universal remote control that I want to use with my Curtis Mathis TV. What code do I need to use to make the remote compatible with the TV?


Thee digit universal remote code for Curtis Mathis are:-
000/ 001/ 004/ 009/ 015/ 031/ 049/ 105/ 109
Four digit universal remote codes for Curtis Mathis are:-
0031 0105 0130
0004 0009 0000 0049
0109 0358 0001 0015

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Jan 10, 2011 | Curtis-Mathis CM25011 25" TV

1 Answer

Nedd to reset TV manually...... remote is not working

I have a curtis Mathis model number cm19102 . I have no remote. It is stuck on no more than 14 channels. Then the word line comes up on blank screen. How can I get it to get more channels

Jul 17, 2010 | Curtis-Mathis CM27101S TV

1 Answer

No sound

Check on the manual control on the tv itself Vol + - buttons see if functions normallyTry website like to buy a remote same as an exact original remote.

Jul 16, 2010 | Curtis-Mathis CM27101S TV

1 Answer

Curtis mathis tv turn tv on some times turns on just fine some times just sound no picture

open the enclosure of your tv..using a soldering iron resolder the CRT board.A CRT board is a small board attache to picture tube resolder all the components there..good luck!

please rate my help tnx.

Jun 04, 2010 | Standard (CRT) Televisions

2 Answers

19 inch curtis mathis tv

This is the closed captioning, even though it may not contain writing in the block. If you can access the main menu then you can try and turn the CC to off. Otherwise you are stuck with it.

Please rate this answer if it helped.

Feb 12, 2009 | Curtis-Mathis CM19011 TV

1 Answer

Curtis mathis tv

the Fly-back transformer is bad, it's arcing "ticking sound" it needs repair get estimate first because it might not be worth repairing depending on the cost of the transformer and labor

Hope this helps
thanks for the rating

Jan 08, 2008 | Curtis-Mathis CM27101S TV

4 Answers

1986 25 inch Curtis Mathis console tv

I have a curtis mathis console tv with a 8track player, casset player record player and a am/fm stereo, mod number on the box is F607 style TC2 seril number 04787814 new in the box never opened. where can i find out its value?

Nov 18, 2007 | Curtis-Mathis CM27101S TV

Not finding what you are looking for?
Curtis CM25101S 25" TV Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Curtis Standard (CRT) Televisions Experts

Martin Murray

Level 3 Expert

1614 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

2236 Answers

Are you a Curtis Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides