Question about Cyberhome DVD Recorder - DVR1600

1 Answer

Finalizing a recording

How to finalize a recording---------recorded a program but it won't play on any other dvd player

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: finalizing a recording

After you insert your DVD wait till recordings page comes up then press EDIT key then press left Arrow then Down arrow to FINALIZE..

Posted on Feb 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I keep getting no disc staus when inserting the sony dvd-rw

Some DVD players wont read the copied DVDs and
then it show no disc..additionally if recorded disc has not been finalized wherever recorded,other players can not read it..To make sure if it is properly recorded you can try to run them on your verify that it works..

However if this is not the case ,I recommend to buy a "wet DVD/CD laser cleaner " from any is available even in Walmart..And clean the laser eye at least twice..
YOUR DVD itself should be clean and finger prints free as well...

Hope this helps! Take care and please Remember to rate/vote and give me
4 Thumbs Up for me to continue for Helping out the Community :)

Jun 18, 2011 | Sony TV Receivers & DVRs

1 Answer

How to program my DISH Network remote to my DVD player?

It's kind of silly but I just pushed the VCR mode button, pressed the power on and off mode button & pressed the up button until the remote found the code. Took awhile but it finally worked.

Dec 28, 2008 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Eror code ec - 207

Not sure what the code itself means, but if the disc was recorded on another recorder, and not finalized, it will not play back on any other player but the one it was recorded on.

Mar 17, 2008 | TV Receivers & DVRs

2 Answers

How to reset dvd recorder to ntsc from pal

After checking today to see no one offered any suggestions - I solved the problem the hard way - I went into settings and although the screen rolled, I was finally able to click onto the ntsc setting after about a half hour of tries and once I clicked it, my screen returned to normal -- i was then able to enter the code that made the player an all region player and was happily able to play a pal dvd I received recently. The procedure was simple -- offered by a European Cyberhome user -- the company is in bankruptcy so you cannot gt help from them. Note - my Cyberhome dvr is 1500- not 1600 as you listed it.

Feb 11, 2008 | Cyberhome DVD Recorder - DVR1600

1 Answer

Finalizing DVD disk

In cases like this you should use nero to finalize the disk for you or stick it in the computer to get the data off the disc using nero as well.

good luck


Dec 03, 2007 | Cyberhome DVD Recorder - DVR1600

1 Answer

Dvr 1200 will not play

After you have recorded you must "FINALIZE" the disk in order to play it in other DVD players or CPU. Press EDIT scroll down to Finalize Disc then OK

Nov 25, 2007 | Cyberhome DVD Recorder - DVR1600

3 Answers

CyberHome DVD Recorder - DVR1600 says No disc when there is a disc

Hi! Pick a jhonson's bud -- dip it into the lens cleaner solution -- rub gently on the lens both clockwise and anticlockwsie -- leave it to dry -- cover up -- run the machine.. but be careful -- don't touch the lens with ur finger and dont try to rub roughly -- lens may go forever. still if the problem remains , replace the lens. chhoton

Aug 21, 2007 | Cyberhome DVD Recorder - DVR1600

Not finding what you are looking for?
Cyberhome DVD Recorder - DVR1600 Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome TV Receivers & DVRs Experts


Level 3 Expert

2236 Answers

The Knight
The Knight

Level 3 Expert

66330 Answers

Andy Bale
Andy Bale

Level 2 Expert

212 Answers

Are you a Cyberhome TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides