Question about Maytag MMV5000 Microwave Oven

2 Answers

Maytag MMV5000 microwave touchpad will not recognize touches

Touchpad will not recognize touches. Tried unplugging, waiting 10 min, and re-applying power. still doesn't work. lcd illuminates and says to touch clock to begin, but nothing happens when the pad is pressed.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Bought a new microwave;

Posted on Dec 12, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You can replace the touch pad. Call Sears or any parts supplier and give them the model number and they can sell you the part. It cost me around $95CDN. There are about 3 screws to take off the plastic grill at the top and about 1 screw at the top of the touch pad to take it off. Then you need to take the electronics out from inside the touch pad and put them into the new one. A repair man will charge you about $100 more in labour. A new microwave/stove hood costs around $600 so well worth the repair.

Posted on Jun 26, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Smh7178ste


Bad touchpad. Part# DE34-00205C for just the touchpad or DE94-01120D for the control assembly (easier to replace but more expensive)

Aug 09, 2014 | Microwave Ovens

1 Answer

The touchpad on my microwave may tag model mmv5000b will not work, how do I fix the problem?


Hello,

the control board needs to replaced for the touch pad to respond well again.

Regards.

Dec 31, 2011 | Maytag MMV5000 Microwave Oven

1 Answer

Maytag MMV5186aaq touch pad doesn't recognize touches on all pressure points. I can't even set the clock.


That looks like you are in need of a replacement key pad.
I can't advise where to get one from as I don't know which country you are in.

Mar 14, 2011 | Maytag MMV5000 Microwave Oven

1 Answer

Unit is 10 years old. Everything is working (keypad, lights, turntable) but unit is not heating food.


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

';

'

Oct 06, 2010 | Maytag MMV5000 Microwave Oven

1 Answer

Maytag mmv5000bdw Touch panel works intermittently The panel will not respond to the touch. Work around include: 1. closing the microwave door hard and trying again. 2. unplugging the microwave and trying...


If nothing works, it sounds like you didn't get the cable inserted properly. It should fit into a connector which carries signals to the microwave's control components. These connectors usually pullup, you insert the cable, and push the connector back down.

Oct 14, 2009 | Maytag MMV5000 Microwave Oven

1 Answer

MMV5000ADW Maytag Microwave Keypad stops working. The light switches on and off when the door is operated and works fine. The time display is working. The keypad is non-responsive. Please help figure out...


How old is this unit? have you taken it apart?there was at one time a wiring issue with these units,depends on the age.other wise I'd say you have a bad touchpad it was another common issue with this unit. part number 56001263 in white runs around $80

Sep 27, 2009 | Maytag MMV5000 Microwave Oven

2 Answers

Boiled water and it exploded, now the microwave is broken


wow, from the looks of it you need to unplug wait 60 seconds plug in to restart, ot buy a new microwave. Perhaps if in the microwave terms it didn't say not to do that call the manufacturer and the will replace it for free

Jul 03, 2009 | Maytag MMV5000 Microwave Oven

1 Answer

Touchpad no response at all


CHECK CONTROL CIRCUIT AND RELACE TOUCH PAD..

Nov 06, 2008 | GE JVM1650 1000 Watts Microwave Oven

2 Answers

Broken microwave


The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for maybe an hour.

Then please let us know if the hard reset does not fix it.

(It may need work on the controller or keypad)

Sep 16, 2008 | Maytag MMV5000 Microwave Oven

1 Answer

Maytag umc5200aas Microwave is totally dead.


Be careful, a Microwave can be a death trap. Check outlet to make sure it's live. Could be a failed low voltage transformer. 

Apr 23, 2008 | Maytag MMV5000 Microwave Oven

Not finding what you are looking for?
Maytag MMV5000 Microwave Oven Logo

Related Topics:

767 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...