Question about Panasonic Workio DP-2310 All-In-One Laser Printer
Probably needs drum, developer or upper fuser roller, best to have service personell have a look
Posted on Mar 05, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: dark spots on my paper
is there a corona wire sliding cleaner on the drum assy? if so it should be firmly at the correct end of its travel - on some printers if it is inboard it will print aline down the side
Posted on May 11, 2007
To solve the
# Hold the cartridge upside down, with the bar-code label facing you and take a damp paper towel.
# Use the towel to wipe the printhead of the cartridge on the bottom (where the ink comes out). Wipe the printhead horizontally in one direction only (left to right).
# Continue doing this until it looks clean.
# Then dab the cartridge on the towel to make sure the ink is flowing.
# Next, look inside the printer and locate the carrier that holds ink cartridges. Caution: Make sure the cartridges are not installed at this point.
1. Look for a shiny piece of metal underneath the contacts at the back of the carrier.
2. Take a damp cotton swab (use water only!) and wipe along the bottom of the shiny metal piece. Note: You may need more than one swab.
# Reinstall the cartridges, making sure you snap them correctly into the printer.
Posted on Mar 22, 2009
Tips for a great answer:
Mar 28, 2015 | HP LaserJet 1020 Printer
May 03, 2011 | HP LaserJet P4014n Printer
Jan 12, 2010 | Brother HL4040CN Laser Printer
May 21, 2009 | Sharp AL-1641CS Laser Digital Copier
Mar 22, 2009 | Lexmark E330 Laser Printer
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: