Question about 3Com NBX 2102PE IP Phone

2 Answers

Cisco IP Phone 7940 and 3com nbx as 3rd party SIP phones

Cisco IP Phone 7940
Also the polycom Soundpoint IP 330.
Can these phones be used on the NBX as SIP phones
I was able to install the 3cx softphone with no issues.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers
Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 339 Answers

Here are the instructions for configuring these units for 3cx

http://www.3cx.com/sip-phones/cisco-7940.html

http://www.3cx.com/sip-phones/polycom-soundpoint.html

Since the 3cx softphone worked well, I don't see why you couldn't configure each as for 3cx and make them work as well.

Posted on Jan 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nbx 2101


You can't. The 1100 and 2100 series 3Com phones aren't SIP phones. Only the 3100 series phones can be used.

May 28, 2012 | 3Com NBX 2102PE IP Phone

2 Answers

What is the default password for Polycom Soundpoint IP 320 SIP?


Default Passwords:
To get into the web interface, the default username/password is "Polycom"/"456" (Note that this does not work with Safari 1.2.2.)
To get into the Admin interface on the hard phone, the password is "456". (Prior to v1.3.1, the web interfaces to the phone uses "Polycom"/"SpIp" as the username/password.)
The "user password" (not used much) defaults to "123".

To reset a lost admin password to default: at phone boot, during the 5 second countdown, push/hold 468* on the phone. Enter the phone's MAC address as the password. This will reset network info but keep peers loaded. Tested on Soundpoint IP 650.

Dec 22, 2009 | Polycom SoundPoint IP 320 SIP IP Phone

1 Answer

Are NBX entry Phone Sip compatible?


The 2100 series and older aren't SIP compatible. The 3100 series are.

Oct 19, 2009 | 3Com NBX 2102 IP Phone

1 Answer

Error loading 0004f220429c.cfg


This means the phone cannot find its <mac>.cfg file on the boot server, and does not have one loaded in its own flash memory.
You will need to configure a boot server to host the SIP software, BootROM, and all the config files (these are included in with the SIP software).
You can download these from Polycom's product support page:
http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Aug 18, 2009 | Polycom SoundPoint 330 IP Phone

2 Answers

Can you help me i need username and password for a 330


Did you try the manual on Polycom's website?

SIP Admin Guide:
http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

If you really need it spelled out for you, your answer is on page 4-99

May 28, 2009 | Polycom SoundPoint 330 IP Phone

1 Answer

Polycom IP 330 SIP C Will not boot up


This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Dec 16, 2008 | Polycom SoundPoint 330 IP Phone

2 Answers

Polycom ip501f error, application is not present


Make sure you have the latest BootROM and SIP config files for this polycom(sip.ld, sip.cfg, etc...) on your TFTP server. If you do not have this - download from here - http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip501.html

If you do not have a TFTP server, you can download one for free.

Dec 04, 2008 | Polycom SoundPoint IP 501 IP Phone

1 Answer

Making a Polycom SoundPoint 501 work on an Avaya IPO


As you have probably found, SIP phones are not supported until R5, which just came out.

Nov 11, 2008 | Polycom SoundPoint IP 501 IP Phone

1 Answer

I am unable to push the configuration files into polycom soundpoint ip 330 through tftpd


This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Aug 28, 2008 | Polycom SoundPoint 330 IP Phone

Not finding what you are looking for?
3Com NBX 2102PE IP Phone Logo

755 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

micky dee

Level 3 Expert

3015 Answers

didi2005

Level 3 Expert

653 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...