Question about One For All URC-3021 Remote Control
All for one remote urc-3021boo for whitewestinghouse tv can t get it to work why?
Try reprogramming the remote with the control codes again.
To control a White Westinghouse TV with a One for All URC-3021, follow these steps:
1) Turn on your TV.
2) On the remote, press the TV key once.
3) Press and hold SET until the LED blinks twice, then release SET.
4) Enter the first four-digit code from the following list:
The LED will blink twice.
If it does not blink twice, go back to step 2 and try the same code again.
5) Aim the remote at the TV and press POWER.
The device should turn off.
If it does not turn off, repeat steps 2 through 5 with the next code in the list.
I hope that helps.
Posted on Dec 23, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
0047, 0051, 0451, 0178, 1147,
Jul 22, 2011 | One For All URC-3021 Remote Control
May 08, 2011 | One For All URC-3021 Remote Control
Jul 29, 2010 | One For All URC-3021 Remote Control
Jun 16, 2010 | One For All URC-3021 Remote Control
Jun 06, 2010 | One For All URC-3021 Remote Control
Oct 17, 2009 | One For All URC-3021 Remote Control
Feb 19, 2009 | One For All URC-3021 Remote Control
319 people viewed this question
Usually answered in minutes!