Question about Flat Panel Televisions
My parents have just bought an Orion TV and it has taken me a week to get code for Sky remote to work but Tv wont switch straight to Sky when you turn Sky on or press sky on remote. You have to change TV to AV mode manually. Is this normal or is something wrong. My Tv changes to Sky immediately when you press sky (mine is a Panasonic).
On the sky box do the following.
Check scart to tv is in the correct socket marked TV.
Try pressing services
then system setup
then picture settings.
Then try switching scart control to on or off.
If this sorts it great. If it doesnt check scart lead has all pins wired & not only A few.
Posted on Jan 20, 2008
Tips for a great answer:
Oct 13, 2015 | Samsung Flat Panel Televisions
Sky+ Remote Control Unit Programming Procedure Follow the steps below
1. Select any channel on the TV.
2. Point your Sky+ remote control away from the TV and press the tv button.
3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.
4. Input the 4 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.
5. Point the Sky+ remote control at the TV and try the volume button.
If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.
Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button.
You can also Visit Sky's Official Remote Code Finder.
Common Sky Remote Codes for your TV
Bang & Olufsen 0118
Visit Sky's Official Remote Code Finder for your TV here.
Click the link to download a PDF containing more Sky Remote Codes
Ask for help finding a code for your television here Sky Remote in our forums.
Jan 19, 2013 | Flat Panel Televisions
Programming the remote control
To control your TV firstly switch on the TV set, point the Sky remote at the TV, press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice. Enter the code for the TV listings below (Use the 4 digit codes from the left hand column), the red light will flash twice if a valid code has been entered. Press the standby button on the Sky remote control, this should switch the TV set off, if so then press the "Select" button to store the settings. You should now be able to switch the TV back on and use the volume control button from your Sky remote.
If the TV did not switch off then it may require a different code, you can either start again using one of the alternative Direct codes below or continue with this process by continuously pressing "TV" then "Standy" then "TV" then "Standby" etc until the TV set switches off. This will provide a manual scan for variations within that product code.
If you are still unable to control your TV from the remote control see: Programming The Sky Remote or go to Sky's official website where you can see if a particular remote control version number will operate your make of TV, this can be found at: Sky please remember to use your back button.
Akura 0042 246, 292, 397, 065, 440
Apr 09, 2011 | Flat Panel Televisions
Oct 13, 2010 | Panasonic Viera TH-42PX80U Plasma TV
Apr 25, 2010 | LG 37LG50 37 in. LCD HDTV
Feb 28, 2010 | LG 47LH40 47 in. LCD HDTV
Aug 13, 2009 | Orion PM4202 Television
Feb 15, 2009 | Samsung LW20M21C 20 in. LCD Television
Jan 13, 2009 | Flat Panel Televisions
Mar 11, 2008 | Philips 32PF5320 32 in. HD-Ready LCD...
308 people viewed this question
Usually answered in minutes!