Question about Dishwashers

2 Answers

Zanussi ZSF 6161 Dishwasher error codes

We have a Zanussi ZSF 6161 dishwasher with a problem. When the unit is switched on and a program selected, the diswasher powers up for a couple of seconds, then the digital dispplay shows an error code ".50" and the dishwasher stops. Pressing the reset buttons on the front of the unit does nothing.

Can you help?

Thanks,

James

Posted by on

  • pmsw Mar 05, 2009

    same code but dishwasher stays on a wash cycle with same water in chamber........was told by supplier it is either a motor or aPCB board

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have got an zanussi des 959 and showing falt code 5 could u help me out

Posted on Jan 23, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi ya, Zanussi dishwasher zsf 6161 error i30. I tilted it back, mopped up. Used dishwasher cleaners, cleaned around door, filters but it happened again. Any ideas?

Posted on Aug 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi zsf 6161 dishwasher - won't start program cycle


follow this steps and fix it. God bless you
Check Power
Check the outlet by plugging an appliance into the same outlet the washer was plugged into an running the appliance a hair dryer works good for this it will draw some amperage. If it works fine move on.

Control
To check the control remove the top panel and then remove the console to access the wiring to the control. Find the wire feeding the control from the main power cord. If you cannot visually see this refer to the tech sheet or service manual. Connect voltmeter to the 2 wires feeding the control if it is recieving power and it does not respond replace the control
5d4c5cf4-821d-4d1a-b62e-e289365a8fdc.jpg

May 28, 2013 | Washing Machines

1 Answer

Replace bulb zsf6161


see your instruction manual, and go to the section troubleshooting.
however is very simple, unplug the power and proceed taking the first wire and make note for color wiring, and replace.
If you do not i.manual download from www. retrevo.com
God bless you

Jun 18, 2012 | Zanussi Dishwashers

2 Answers

I have a Zanussi ZSF 6160 dishwasher which is not heating the water. I've checked the PCB and visually it appears ok. How do I change the heating element?


measure the heating element resistance it should be around 25 ohm.
otherwise it is the problem.

You can replace the relay, sometimes it stop working with no external damage signs

Jan 08, 2010 | Zanussi 24 in. ZSF6160 Free-standing...

1 Answer

I have a Zanussi Electrolux Jetsystem Progress ZSF 6161 Dishwasher which, no matter what programme I use, stops after 2 seconds and a -10 flashes.


I have a Zanussi Jetsystem Progress ZSF 6161 Dishwasher stops after a few seconds and flashes -30 Any ideas? thanks!

Jul 28, 2009 | Zanussi Dishwashers

1 Answer

Zanussi ZSF 6161 Dishwasher with Error 30 Code


The light cover on the side is loose causing it to flood remove the side and tighten the light cover the tilt the dishwasher to get water out of the float tray. let the dishwasher dry out and you should be grand

Mar 22, 2008 | Dishwashers

1 Answer

Problems! zanussi zsf6120


You can check the heating element with an ohmmeter and it should read a few hundred ohms. Don't know about the thermostat but it should be inline electrically with the heating element and should ohm as a short when cold.

Nov 23, 2007 | Zanussi 24 in. ZSF6120 Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

3,063 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Brad Brown

Level 3 Expert

17431 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...