Question about Washing Machines

2 Answers

Ge harmony top load model wpgt9350copl washing machine

My GE Harmony makes a very load noise like it is hitting something during the high speed part of the spin cycle. I have taken the back cover off and cant' see it hitting anything. The tub is suspended so it is easy to see around it. Could this be a bearing somewhere.


Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 447 Answers
Re: ge harmony top load model wpgt9350copl washing...

This is a very complicated machine utilizing no transmission, rotor/stator type drive motor, and a locking/unlocking clutch mechanism design to either engage or disengage the wash basket. These machines are tricky even for professionals to properly diagnose.

Posted on Jan 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: ge harmony top load model wpgt9350copl washing...

My GE wpgt9350copl just exploded. Basket broke during high speed spin, blew the top off (and I'm not talking about the open/close cover. The whole top) and the machine spun 1/4 turn and busted a hole in the wall. What a mess. Bought a couple of years ago when they first came out from Home Depot. I'm screwed! I know it'll cost a few hundred dollars. Right now thinking of spending more and buy a new one.To go w/dryer

Posted on Feb 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?

How To Fix A Washing Machine Making Noise During The ...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

Dec 03, 2015 | Washing Machines

1 Answer

GE Harmony top load washer stops during washing cycle and display screens turns off. Does not run a complete cycle on any selection. Could it be the display unit us bad?

check the pump if thats ok you might have a bad time switch but they can be quite easy to install and cheap to buy depends on the model and were you get it

Mar 01, 2015 | GE Washing Machines

1 Answer

I need a owners manual.


May 12, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

Loud noise when aggitating code says motor not rotating properly

It's noisy Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.
or something stuck up in spinning motor assembly.

thanks and plse do not forget to accept the solution.

Apr 02, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

GE Harmony Washer Beeping

first I would to a hard reset unplug washer and dryer for 30 sec then plug back in... also check the wire that connects the washer and dryer ....if this don't wark let me know I can tell you how to get the error codes out of it... let me know

Sep 13, 2008 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

HELP, GE profile harmony washer wont drain properly

If you remove the tub to pump hose from the pump and try to turn the pump impeller by hand, it should turn freely. If it does not turn freely, then the motor could be seized and you will need to replace the pump.

Oct 15, 2007 | GE WPGT9360EPL Top Load Washer

2 Answers

Ge Profile Harmony Washer doesn't drain properly.

It sound like you have a blocked pump. Remove the pump from the machine and check where do you have this clogged, inside the pump or in one of the pipes connected to it. Good luck!

Aug 16, 2007 | GE WPGT9360EPL Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides