Question about Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

Need intructure Don't know how to use or need the instructure

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 130 Answers
Re: Need intructure

You should be able to go to boschappliances and search in the customer support area for your manual. I just tried it and found the owners manual for your unit. You can also call the Bosch Customer Support number if you need help getting to the manual. They are always glad to help you understand and use your washer. Hope this helps.

Posted on Jan 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The writing on the front control panel wiped off and now I don't know what each button is for.

Hello InquirinMind - If you are referring to the model number posted above GLTF2940ES, I have located the Operating Instructions on the manufacturer website. Hope you find all the information that you need and let me know if you need further assistance.

Mar 30, 2013 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

How to replace switch

This can be dangerous for you if you don't know about. You need a technical person to do that.

Else you should know how to do that

Nov 05, 2012 | Washing Machines

1 Answer

Whirlpool duet dryer control lock light is on. How do you reset it?

the control panel on the right side is a button that says hold for three seconds to lock. Look closely it's in small lettering. I don't know what model you have, so if you can't find the button please send the model number. If you need further assistance let me know

Oct 13, 2012 | Washing Machines

1 Answer

I have a servis 1200rpm washing machine in my just-moved-in flat. I don't know the exact model of the washer, but it does not start. There is light above the symbols when i press them, but it still...

Hi from retired Englishman in SW France,

Methinks you could do with a manual- for now and later!


Now- unfortunately FixYa cannot provide manuals direct - members of the forum are just people from all over the world, probably working from home, and not representing any particular manufacturer ;-0)
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Sep 20, 2011 | Washing Machines

1 Answer

Changing light bulb when broken? I need to unscrew what is left, don't know how to get to it.


I assume you are referring...that you don't know how to get the rest of the broken bulb out?

Do you have a potatoe? Hopefully, you do! Cut it in half and stick the inside of the potatoe onto the left over glass and turn it! This is the best and safest way to remove any broken bulb!


If there is a cover over where the bulb is...this cover should just pop off!

If there is no can use a pair of pliers, but...please unplug your refrigerator...First!

Kind Regards!

Sep 09, 2011 | Maytag MLE2000 Front Load Stacked Washer /...

2 Answers

I just need phone # i have already spoke to Daniel S on Sunday i just need a phone # and im not paying again u drafted $64,64 out of my account when u should have only drafted 15.00 i need to speck to some...

For a problem with the site and professional advice, you need to go to the bottom of the site page and select Contact, and let the admin of the site know your trouble so they can address it.

Sep 07, 2011 | Washing Machines

1 Answer

I need to wash the colors in cold water ONLY but when I set the washer on cold, it still washes clothes with warm/hot water for part of the cycle, causing the colors to bleed. How do I need to set it up...

G'day, simple solutions is to swop your hoses at the back around, you can do this at the taps... If you only have one hose going into machine, you need to make sure the hose is on the cold water. Some new machines heat water internally, hence they don't need hot water going in at all. Sounds like you are putting hot water only into your machine. If you only have a hot water tap in your laundry for washing machine, this cold be a problem as the machines don't cool down the water. If this is the case you might have to look at other plumbing solutions... Hope this helps, let us know how u get on

Aug 08, 2011 | Washing Machines

2 Answers

Maytag washing machines and Dryers replacement keys.

LPD will help you out they provide an excellent service and the cheapest in uk.
phone number 0121 580 0880

Mar 18, 2009 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
Bosch Exxcel WFO 2264 Front Load Washer Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers


Level 3 Expert

57192 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides