Question about Sanyo PLC XU35 Multimedia Projector
I know this is a dumb question. Want to show powerpoint from laptop to Sanyo Pro Xtrax Projector and want to know what cable connection to use?
Not all computers are F4 - some are F7... - If there is not a small graphic on each Function button - just press and hold your function button and I'd start with F3 then F4 then F5 and so on - often your image will appear on the projection screen and disappear from your laptop - just re press Function and the appropriate key - you may also need to change your display - go to your control panel then display then settings and you will want 1024x768 - as far as cables you will need a male VGA that will plug into (usually blue) connection on your laptop and then depends on what type of projector you are using - it may take a VGA or RGB (5pin cable ~ red green blue horizontal vertical) make sure that in your menu settings that you have it set to the same as the input you have plugged into
Posted on Feb 13, 2009
DO ypu have the function button, if you do then press it + F4 at the same time
Posted on Aug 25, 2008
We work with these where I work and I believe you also have to change the Input settings. I apologize, but I can't remember what Input setting to change it to, but I do know for sure it's got to be changed, depending on what port on the back of the projector you plug your VGA (computer component cable) into.
Posted on Jul 03, 2008
Do you have Computer Component Cable?, which comes along with the projector.
It looks Similer as your PC Monitor Cable, which has two Ends. Try that.
Posted on Jan 19, 2008
Tips for a great answer:
4,088 people viewed this question
Usually answered in minutes!