Question about Kenmore 20722

1 Answer

My kenmore 70 series Washer

Doesn't spin but makes a loud noise when it gets to the spin cycle

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: My kenmore 70 series Washer

You here a clicking sound by the timer and the machine stopped

Posted on Apr 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kenmore 70 series

Does it do it when the spin stops?

Nov 29, 2012 | Kenmore 24852 Top Load Washer

1 Answer

I have a Kenmore 70 series top load washer which will not go into the spin cycle. It is making a loud clicking noise

lean the washer back and look between the motor and trans,there is a coupler in the middle that most likey broke

May 04, 2010 | Kenmore Washing Machines

1 Answer

Kenmore 70 series

hello mam for two years you have not used the washer so the bearings may worned out so lubricate the bearings and check the belt should not have any cracks on it,and after lubricating run the machine without loading clothes the observe the noise if seems to be same then change the bearing to change the bearing call the engineer.

Sep 29, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

I have a kenmore 70 make ratchet noise ,will not

Probably bad lid switch. Your ratchet noise is normal during the wash cycle.

Mar 24, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Kenmore 90 series noise after spin

You need to replace the drive block and basket drive. You can download a tutorial to get you started at The gearcase replacement tutorial will put you in the right direction. Dave

Mar 01, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore 80 series 110 washer making loud noise during final spin

Make sure all springs are still in their place tilt the machine back and look under it and you can see them. 2nd all legs must be level as well as the floor.

Dec 21, 2008 | Kenmore 24032\24036 Top Load Washer

8 Answers

Kenmore Washing Machine 70 series

You most likely have a broken coupler between the motor and gearcase.
You can buy the part for about $10 or have someone come out and replace it for about $150-200.
If you will post the complete model number from the the washer so I can see which style cabinet you have, I will try to walk you through the repair. It isn't very complicated if you are handy with home repairs.
With the age of the machine it probably just needs a coupler, but it could also have a problem in the transmission or basket drive that has caused the failure.

Nov 13, 2007 | Kenmore 22422 Top Load Washer

2 Answers

Loud clicking noise - wont agitate or spin

I had the same clicking noise. Turned out to be the coupling between the motor and transmission. A $15 plus 1 hour labor fix

Nov 10, 2007 | Kenmore 22422 Top Load Washer

1 Answer

Series 70 Kenmore Washer Won't Agitate or Spin

baseball, sounds like a broken coupler, check out this post and post back, Catriver

Apr 26, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides