Question about Hitachi CP860960LAMP Projector Lamp for CPS860W, CP-X960
Recently I replaced the bulb in this unit and now I continue to get a message at startup that the bulb needs replaced call a maintenance technician. After a few minutes the message disappears. I have reinstalled the new bulb, pressed the reset switch numerous times, and looked into the owners manual. Unfortunately, the owners manual says nothing but replace bulb. There is no troubleshooting section. Any ideas
Turn On. Press RESET switch for 3 or more seconds until a lamp and 2000 message appears in the middle of the bottom of the screen. Press RESET again and this message will expand to include cant remember then press arrows left arrow and the 2000 will reset to 0. If the first press does not immediately provide a message press it for longer and expect to see message on release. As mentioned you have to be quick otherwise the menu dissapears. If this happens just do it again until you get it completed.
Thanks to the previous reply.
This works it has just been done on a CPX960 without bulb replacement. SO
Dont replace the fuckin thing till it needs to be replaced.
Posted on Mar 24, 2009
Press and hold the reset for 3 seconds and the lamp timer will come up. Then use the arrow keys to set the time back to 0hrs. This can take a few times to get the keys pressed before time-out, be patient.
Posted on Feb 22, 2008
Pl check if the current reating of lamp and as well as the wattage of lamp.
Posted on Jan 24, 2008
Tips for a great answer:
Mar 17, 2014 | Hitachi projector replacement lamps pj tx...
Nov 09, 2013 | Hitachi 42V515 rear projection TV lamp...
Mar 14, 2013 | Hitachi CP-X505 Lamp
Feb 06, 2013 | Hitachi PROJECTOR, HITACHI, CP-RX82, X -...
Jul 31, 2012 | Hitachi LP700 Replacement Lamp
Feb 14, 2011 | Hitachi 42V515 rear projection TV lamp...
Nov 05, 2010 | Hitachi LAMP MODULE CPS860 & CPX...
Aug 12, 2009 | Hitachi CP840/940LAMP Projector Lamp for...
Apr 06, 2009 | Hitachi REPLACEMENT LAMP, Projector Lamp...
685 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: