Sounds like an inverter problem. If the power supply is internal replace the capacitors coming out of the voltage regulators. These are usually 1000mf and/or 470mf. If that doesn't do the trick look up the numbers on the 8-pin chips that drive the secondary transformers on the inverter to see if they are getting the right voltages. Good Luck!
I am considering new computer with Windows 7 Home Premium Edition. Will my ACER AL 1716 Fb Monitor...
(More)
I am considering new computer with Windows 7 Home Premium Edition. Will my ACER AL 1716 Fb Monitor be compatible?
Hello. We have been using our ViewSonic VX2835WM monitor for about two years, and today when we...
(More)
Hello. We have been using our ViewSonic VX2835WM monitor for about two years, and today when we moved it from one table to another, it lost power. We have checked the power cord, even swapped it out with a known good cord, and still no power LED on the front controls. Do you have any images or procedures for taking apart this monitor, so we can see if any of the caps have blown? Thanks in advance. M.
My VA902b will often go blank upon coming out of power save mode. The expected display will flash on...
(More)
My VA902b will often go blank upon coming out of power save mode. The expected display will flash on the screen for a fraction of a second, then it goes blank. Disconnecting the monitor from the computer and reconnecting generally gets the image back, but it sometimes takes a while. Is this something I can fix?
My new 191EW monitor says Monitor Controls Locked. How do I unlock it to change the brightness,...
(More)
My new 191EW monitor says Monitor Controls Locked. How do I unlock it to change the brightness, color etc please?
i have checked my monitor on another computer and it works so i replaced the video card but still no...
(More)
i have checked my monitor on another computer and it works so i replaced the video card but still no picture just the green light flashing