Question about LG 15LW1R 15 in. LCD Television

1 Answer

No channel signal is found in searching tv channels (15LW1R)

It ran well, but suddendly all stored tv channels were lost. The airal tv cable is ok because another TV machine runs well. I tried to search tv channels, automatically and manually, but without success. The parameters seem to be ok. May it be a physical problem ?. May someone access via wifi to the transmitter machine and make changes to desconfigure it ?.

Posted by on

  • 1 more comment 
  • DavidMMEsq Apr 27, 2008

    I have the LG 15LW1R and it has worked bautifully fro 2+ years. Today, the transmitter signal cannot be found. I have rebooted, relocated, etc. Can some one help!

  • joibez Jan 03, 2009

    My wireless TV worked fine during 4 year, sudenly transmitter blue light stopped today and did not come again. Somebody can help with to fixed?

  • NMNB Feb 07, 2009

    SAME PROBLEM NO BLUE LITE

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Sometimes a power surge or outage will wipe all the presets. (Don't you just hate that?) Put a surge protector on the outlet before you reset the system.

Posted on Sep 27, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 42LC2DR

You need to press the button on the top right of the control ( the TV button) once and that will allow you to control the tv once again. Problem occurs when you accidently push VCR or DVD button which means remote control will try a different frequency to operate a VCR or DVD that isn't there. Hope this helps.

Posted on Sep 18, 2008

  • 16 Answers

SOURCE: TV freezes when switching to a digital channel

The problem your describing can be contributed to your cable box. Depending on your cable company there are times when the box has trouble translating the signal to the tv. You tv is operating normally. Suggest to the cable company to switch your box.

Posted on Dec 07, 2008

welcomejee
  • 10594 Answers

SOURCE: 32LG3000 LCD TV shows no picture when resuming from standby

Hi,
It seems just channel stored data issue.
Please perform Auto Preset / Auto Channel / Auto Tuning (mentioned menu items) and store all channels again.
Hope problem will resolve.

Posted on Dec 18, 2008

  • 1 Answer

SOURCE: Unable to tune my LG Electronics Digital TV (Model 37LC2d-ec) to receive digital channels (have tried auto and manual program). TV will only receive basic standard channels. TV bought in Uk - now livi

My LG plasma TV 50pc3d when power-on only see vertical bars. what 's going on. please help. Thank you

Posted on Jul 22, 2009

bob_computer
  • 3153 Answers

SOURCE: Same problem

Out of range usually has a very different meaning when looking at LCD TV's

It usually means that a resolution that was beyond the design capacity was chosen.

eg some TV's can only do 720p but people may try to set them to 1080I

this would give an OUT OF RANGE" error this is also common to many computer displays too.

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

19" Element HD Digital LED TV Model ELEFW195 Does not scan Digital Channels just Analog Channels.


Auto-channel search can't find digital channels - Community ...

community.insigniaproducts.com/...channel...can...digital-channels/.../13...
Aug 6, 2010 - When I ran the auto-channel search it could only find 4 analog ... Notgetting Digital Channels on NS-26L450A11 ... I've plugged the cable from the wall into the TV, and preformed the auto channel scan, with "cable" selected.

Troubleshooting Guide for Digital-to-Analog Converter Boxes

https://www.fcc.gov/.../troubleshoo...

Federal Communications CommissionIf you aren't receiving digital signals on your analog TV, you can purchase a ...antennas are designed only for reception of either VHF or UHF signals (but not both). ...The channel scan will automatically search for digital broadcast channels ...

Antennas and Digital Television ' Federal Communication


Jan 13, 2016 | Televison & Video

1 Answer

Lost BBC1 BBC2 digital after switchover


You might have more than one transmitter. Some TV's etc only store a certain number of channels and have a max amount!. When weaker transmitters are present sometimes the memory of the TV will only store the stronger signals first from these weaker sites, with the two BBC channels being too weak to be detected.
The solution is to do a manual search on the transmitters you know are very strong. For example if channel 43 has strong signal you would search on that. The auto search will start at 21 and work it's way to 69. But if your area transmitter with the strongest signals is high up the scale the weaker transmitters will be selected first!

Apr 09, 2012 | Electronics - Others

2 Answers

No Signal


Reboot ur DirectTv box.By unplug,replug it and hour later to let the box upgrade it solfware.Go to ur tv menu setup rescan it again for all the channels.It should work now.

Mar 14, 2010 | Vizio VO47L 47 in. LCD TV

1 Answer

"Failed to receive broadcast"


On your TV remote,press "INPUT".It is hard to find,but it should be there.Select"TV" and press"ENTER" button.I believe it is on the top of the list.On some cable boxes you have to select channel 3 and use the cable box remote to change channels.Also,make sure your TV antenna setting is set to "Cable" from the "Air/Cable"(Antenna setting).You will have to read your manual to find out how to get to this menu.After that do a "Ch Search"[Channel search].This automatically searches for all available channels and stores them. It will take some time.You will see the channel numbers as it does it's search.This is done so when you press channel up and down keys it will only go to next channel available and not to one with no signal.Hope this is of some help.

Feb 19, 2010 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

1 Answer

No digital channels after running auto search


Same thing with my vizio vx37l tv. Did you fix the problem bpakja? If so please let me know how.

Sep 30, 2009 | Vizio VX37L Television

1 Answer

Can`t receive all t.v. channels


get a menu of the tv and enter into a channel searching select auto and press search, automatically your tv will start searching. each signal found will be stored on each one channel.

later just store those channels into the memory of the tv.

Apr 29, 2009 | Bush 2871NTX 28" TV

1 Answer

Channel setup


You will have to run the Autoprogram menu function from the menu. Here are the steps

Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
Use the cursor right to enter the Installation menu.
Select Autoprogram in the Installation menu.
Use the cursor right to enter the Autoprogram menu.
Press the OK button.
Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area.
When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC,ATSC, QAM modulated) channels available in your area.
Make sure that registration with your cable TV provider and connection of equipment are completed.
Press the green button “Next” on the remote control.
Press the green button “Start” to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is displayed.The progress bar indicates the number of analog and digital TV channels found. (Also digital channels via CableCARD are being programmed.
When Autoprogramming is complete, a message appears confirming the completion and the TV switches to the first installed TV channel.

Mar 16, 2009 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

How do i tune my philips 3590H philips dvd recorder into digital


The User Manual for your DVD Recorder is available here... http://www.p4c.philips.com/files/d/dvdr3380_05/dvdr3380_05_dfu_eng.pdf

Info related to your specific problem is as follows...

Setting your TV channel
programmes
Before the recorder can start recording
the TV channel programmes, you need to
search for the available TV channels and
store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
recorder, the TV and Satellite Receiver/
Cable Box (if any) and switched them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
A Press SYSTEM-MENU on the remote
control.
�� The system menu appears on the TV.
B Use ���� keys to highlight
{ System Menu - Channel Setup }
and press ��.
System Menu - Channel Setup
Modify Channel Information
Sort Channels
Channel Search
Edit
Sort
C Use ���� keys to highlight { Channel
Search } and press OK.
�� The automatic TV channel search
starts. This process may take several
minutes. Once complete, the total
number of channels found appears on the
TV.
Automatically scan all the receivable analogue local TV
channels and store these channels on the recorder.
�� Use ���� keys to highlight { Channel Search } and press OK.
�� The automatic TV channel search starts. This process may take
several minutes. Once complete, the total number of channels found
and stored appears on the TV.
Modify Channel Adjust a stored TV channel to your preference, improve the
Information reception and the sound quality of that TV channel.
1) Use ���� keys to highlight { Modify Channel Information } and
press OK.
�� The channel menu appears.
2) Use ���� keys to select one of the options.
{ Name } – You can use the numeric keypad 0-9 to select
the channel preset number which you wish to
change.
– Use ����keys to change alphabet/ number and
use ���� keys to select different entry fi elds, then
press OK to confi rm.
{ Scan Mode } – Select TV channel search mode based on
channel allocation or frequency.
– Use ���� keys to select { Frequency },
{ Channel } or { S-Channel } (Special Channel),
then press OK to confi rm.
{ Frequency } – Shows the frequency of the current TV
channel.
– If required, use ���� keys to start the automatic
frequency search and press OK to confi rm.
{ TV System } – Set the TV system that produces the least
distortion of picture and sound.
– Use ���� keys to select a suitable sound mode,
then press OK to confi rm. (See chapter “TV
System Guide” at the back of this manual for
more information).
{ NICAM } – Turn on or off the digital sound transmission
system which improves the sound quality of the
TV channel.
– Use ���� keys to select { On } or { Off }, then
press OK to confi rm.

Dec 12, 2008 | Philips DVDR3380/05 DVD Recorder

1 Answer

Lost reception


ok john! go to menu then select the CABLE/TV/AIR, selection then select the TV mode! then select the auto search or auto program! the you can see now the channels is searching!

Oct 16, 2007 | Televison & Video

1 Answer

Some channels missing...


Try to tune the tv in manual search method. If you get means store it manually. Nothing to worry. This is due to malfunction in AUTOMATIC FREQUENCY CONTROL COIL weak. Even you won"t get channels in manual tunning method. Change tuner and afc coil. Problem solved.

Sep 04, 2007 | Mitsubishi CS-27205 TV

Not finding what you are looking for?
LG 15LW1R 15 in. LCD Television Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...