Question about Zanussi FJS1225W Front Load Washer

1 Answer

Help plzz the power light is just come on no others lights and it keeps beebing

Posted by on

  • Anonymous Mar 02, 2008

    keeps beebin then error code cums up e1o any suggestions please

  • Anonymous May 09, 2008

    I tried to stop the washer because it was spinning loudly and the door wouldn't unlock, then I kept pushing bottoms and the lock code came on and it opened, but now it won't come on. The two lines come on if I unplug it and plug it back in and it beeps, but none other lights come on and it won't start.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

God Sir

I am mr Yapi Antione from abidjan i am dealing with all washing marshing i saw your profle and i am intrested to to know the pris list of all the marshing in your company
i will like to haer from you as soon as posible

yours representetive
Mr Yapi Aantoine
you can reply me in this my email adress
Call me 0022501307526

Posted on Feb 17, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The Fresh food light and the display lights went out at the same time.

Thank you for your post, Gearld Beebe!

I understand that the light inside of your Frigidaire refrigerator and the display lights are no longer working. It sounds like you could be having a faulty wiring issue or power issue. You may want to have a technician come out to review your refrigerator to assure each component is getting the proper amount of energy or have a electrician come out to review the receptacle to assure it is providing accurate energy. I hope this information is helpful. -Matt

Dec 12, 2014 | Frigidaire Refrigerators

1 Answer

It just keeps beeping every time I touch any key. Won't even load paper. Can yu help me?

Check to be sure the printwheel is properly installed, look for debris in the P/W area and the bottom of the Typewriter. When you turn it on do lights flash of beebing occur, how many and which lights?


Apr 14, 2011 | Lexmark Wheelwriter 10 Series II...

1 Answer

Hi there, I have a MW059NZ Smart Drive 9 Pride washer that has decided to stop working. Turn machine on (lights up ok) press start but nothing happens. Then a friend said to press power button and advance...

under the top of the machine on the right there is a reed switch which is actic=vated by a magnet in the lid remove the two bungs and screws so you can lift the top up a bit and you will see it there one screw to remove it if its corroded or swollen its faulty either repace it or as a easy fix cut both wires off it and join them together and tape up, this should do it

Mar 18, 2011 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Turn power on to playstation 3 and it beebs light turns green then yellow then shuts off.

It's called the "yellow light of death". I can help you fix this issue just email me, if you still need help.

Feb 08, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Computer won't turn on!

what it might be is that your hardrive or power supply is not working and that you need to have it replaced

soory i couldnt be of more help!!

Jul 22, 2010 | HP Compaq d530S PC Desktop

1 Answer

2007 dodge ram 4.4 beeps when i press the brake pedal but the tail light is out on the left side also. And when you turn on the left blinker it goes crazy fast and no light in the light assembly. Help?

If you have a beebing noise every time you press on the brake, it is because a tail light is burnt out. There are two filaments in each brake light. Therefore, when you turn on your hazards, it will appear that both tail lights work properly. The beebing warning sound is actually a feature that Dodge put in the Rams so drivers would know their tale light is out. Just replace the tail light bulb, and the beebing will automatically cease. To get the tail light housing out, you will need a torex screw driver. Also, you twist the bulb housing out as opposed to pulling it out. There are three prongs that twist out.

Jan 21, 2010 | 2007 Dodge Ram Truck

1 Answer

Dryer light stays on , won't start just keeps beebing....

Your door switch is broken (push button switch on the door frame). Without the switch engaging properly, the dryer light will continue to stay on and the dryer will not start. You will need to replace your door switch.

Oct 15, 2008 | KitchenAid KEHS02RMT Electric Dryer

1 Answer

Washing problem

Sounds like you have a bad timer. Repost your question with make and model # of machine and perhaps i can be of more help.

Sep 09, 2008 | Washing Machines

1 Answer

Problem withPanasonic phone

Unplug the power supply to the phone, wait 1 minute and plug it in again

Mar 05, 2008 | Lands Phones

Not finding what you are looking for?
Zanussi FJS1225W Front Load Washer Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides