Question about GE Profile Performance WPSF4170WAA
How do you take the Agitator off of the washing machine? I't make a very loud noise & the Agitator seems loose.
Most ge washers you just get ya fingers under the bottom and jerk up hard they have a plastic piece under them that has to be replaced from time to time its no big deal
Posted on Jan 18, 2008
Tips for a great answer:
Dec 03, 2015 | Washing Machines
It is so common that the washing machine can make
terrible noise in many ways and is a common fault. In all occasions it is
important that your observation is most important and so is vital to the
identification /rectification and solution. If you have noticed that machine is
vibrating when it is running then the motor /drum suspension has to be
inspected. Since these fittings are located on the underside of the machine it
is important that you look for the noise with a good inspection lamp. Manually
turn the motor and drum and listen for the noise, if so the motor bearings, the
drum agitator shaft and fittings must be checked. Also the suspensions which
include the shock absorbers and springs, the body clamps must be checked to be
in correct alignment and not changed in position. Tightening of the
mounting is also very important. Finally
in most cases a drop of OIL or smear of grease on the moving parts cane solve
Check this link :
For replacement of bearings check for tips on this visual link: http://www.espares.co.uk/advice/washing-machines/a/7/1401/how-to-replace-the-bearings-on-a-washing-mach.html
Jan 15, 2013 | GE Profile WPRE6100G Top Load Washer
Sep 10, 2012 | Kenmore Oasis Agitator 4.5 cu. ft....
Jul 24, 2009 | Frigidaire Affinity ATF6000F Front Load...
Jul 01, 2009 | GE Profile Prodigy WPSE4200A
May 24, 2008 | GE Profile Performance WPSF4170WAA
Apr 14, 2014 | GE Profile Performance WPSF4170WAA
896 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: