Is the phone set on 'always visible'? I think on my LG Rumor, if you have visibility sest to hidden, the phone will not look for the bluetooth. Not sure if that's it or not, but wanted to mention it just in case that might be the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pairing the headset with a phone is a simple task: just hold the multi-function button for an extra few seconds when turning the H500 on, and the blue LED call indicator will turn on. This means that the headset is ready to be paired, and can be discovered with any phone, PDA, or computer that supports the headset or hands free Bluetooth profiles. As is the case for most headsets on the market, the PIN code for the H500 is "0000".
Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc
turn bluetooth on your phone on. then on your bluetooth headset hold the power button for about 10 seconds or until you see the bluelight on steady. next on your phone in the bluetooth section klick ok on the search for device option, when you found the bluetooth with your phone it will ask if you want to use that device, klick yes, and it might ask you for a code, enter four zeros "0000" and that should connect automatic.
I just did this successfully. Trick was: (1) be sure your headset is fully charged and in the "ON" mode... to do this, you must hold down the power key (the one with the little phone receiver on it) on the H500 for 8 seconds or more or until the blue light is on steadily; (3) THEN go to the Settings & Tools menu on the enV, select #7 'Bluetooth Menu' and then select Add New Device. It will search for your headset automatically - note: the headset has to be powered on for this to work. Then 'pair' will appear as a menu option, select it, and it will pair automatically.