My kodak DX4900 just completely locked up and wen i turn it on the top screen says e 13

You can read it online and/or download a PDF from the manufacturer's web site at
http://support.en.kodak.com/app/answers/detail/a_id/18456/kw/dx4900

There is no firmware available online for this camera model. Therefor there is no solution for this issue.
Due to lack of spear parts for this particular model KODAK no longer repairs this model.
KODAK also offers a Trade up option where you will have the opportunity to trade up to a newer model 25-30% cheaper than the market price.

In order to arrange your repair/Trade up: Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

If I'm not mistaken only KODAK rechargeble batteries are suitable for this docking station. Please follow the link to the recommended batteries:

http://www.kodak.com/global/en/service/batteries/batteryDigCamChart.jhtml?camera=DX4900

hi,
you must be contact kodak servise center,and if you have the same door then first remove the scruve near by cell door then put some presure on it for remove the body you must be find that now you can change it easily

services is costing high better buy canon or nickon cam

Remove the batteries and clean the battery contacts inside the camera with a soft cloth (a heavy buildup on the contacts may require cleaning with a fine wire brush, steel wool, or sandpaper). Remove any residue that the cleaning leaves in the camera, and then reinstall the batteries. This clears most power-on problems, but if yours persists, check the Kodak troubleshooting guide at:

http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198

Get on the internet and go here http://www.kodak.com/global/en/service/downloads/dln_ekn026079.jhtml?pq-path=4509 then choose Vsta oporating system and download it

try to remove the memory card first and turn it on without memory card, it has a built in memory by the way. if it works, throw away the memory card, If the problem is still there, try to shake it side by side. If it still dont works, it needs to be opened, something is stucked inside.

I have a Kodak DX4330 and to my knowledge, do you remember if your dock or usb that you plug the camera into was plugged in when you installed the software? I think that if you have it plugged in and install the software and then try and transfer the images, it doesn't work. You can try to re-install the software and make sure the camera dock/cable isn't plugged in and if that doesn't work, make sure the little kodak symbol on the start taskbar is visible when you press the share button. i hope that this helps you.

1) Rechargable batteries have a finite life. At some point they'll no longer hold their charge. This may be the case with your camera. 2) Alkaline AA batteries do not perform well with digital cameras or other high drain devices. They can not maintain a voltage level these devices require. It is unlikely you'll get much use out of alkaline AA's with your camera. The solution? Buy a new rechargable battery for the camera.