Question about Canon PIXMA MP160 All-In-One InkJet Printer
I have one mp160 prienter is alarm,power light is blinking lcd is keep on changing at is the problem
I just helped my daughter fix hers by following these instructions I found elsewhere - it worked. Make sure you wait until the light stops blinking to push 'reset' 4 times. Also - lots of people reported small objects obstructing the cartridge - make sure that is not the case first.
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..
Posted on Jan 07, 2009
this the error code
E9 The connected digital camera / video camera does not support Camera
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full
First, download the software at http://www.box.net/shared/4yblbn34kg
Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware
Run the software.
Posted on Mar 23, 2008
CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
Posted on Sep 04, 2009
Find the latest driver online! Problem seems to be solved!
Warning now pops up, informs you of error and gives you the option to click OK to proceed despite~low ink, cartridge problem ect.
Blinking amber lights go away after a few minutes
Refilled ink, no problem ;-)
Posted on Jan 31, 2009
GET YOUR SOLUTION DIRECTLY FROM CANON. VISIT
Posted on Dec 15, 2008
Tips for a great answer:
Dec 17, 2015 | Printers & Copiers
Jan 12, 2010 | Canon PIXMA MP530 All-In-One InkJet...
Oct 29, 2009 | Canon PIXMA MP160 All-In-One Printer
Aug 06, 2009 | Canon PIXMA MP160 All-In-One InkJet...
Jul 08, 2009 | Canon PIXMA MP160 All-In-One InkJet...
Apr 25, 2009 | Canon PIXMA MP160 All-In-One Printer
Jul 27, 2008 | Canon PIXMA MP160 All-In-One Printer
Jul 25, 2008 | Canon PIXMA MP160 All-In-One InkJet...
Jun 10, 2008 | Canon PIXMA MP160 All-In-One Printer
Apr 17, 2008 | Canon PIXMA MP160 All-In-One InkJet...
4,678 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: