Question about Garmin Nuvi 660 GPS Receiver

2 Answers

Garmin Nuvi 660 frozen screen

Screen is stuck
will not turn on or off
it shows the basic display but will not respond to any on or off
it shows up as on all the time

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Don't know why it happens, but mine did the same thing. There's a reset button on the back, underneath where you lift up the antenna. Unplug the unit from the power source, push the reset button, reconnect to a power source and it should work fine; mine did. Good luck. Got this info from my Garmin owner's manual.

Posted on Oct 29, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

Yes it's normal your unit seems to be lock up , did you play with the lock up screen via the menu or did you insert a 4 digits to lock up , it look like you did.

Contatc GARMIN and ask for Automotive technician. He will do a short test with you by phone. Be prepare with serial number and the yellow card who has your SERIAL CODE for GARMIN.

I had 2 units of 660 and it work very well. They are the best unit , better than those new 7xx series who has cheap internal speaker.

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Garmin nuvi 50lm only shows garmin screen and just a bit of green on the bottom. sometimes it shows the green register bar all the way accross


Garmin nuvi 50LM Boot problem ' POI Factory




www.poi-factory.com > Garmin talk









Aug 11, 2012 - Why won't my nuvi 30, 40, or 50 go past the Garmin logo screen when I turn it on? .... Just wanted to say thanks to Muell9K for the hard reset solution. ... get the Nuvi to start up with the screen that shows the picture of a Garmin ...


Crap... White Screen (nuvi 350)

May 11, 2008


garmin frozen?? (how do I reset?)

May 11, 2008


More results from www.poi-factory.com




How to Reset the Garmin nuvi 30, 40 and 50 with GPS City ...





? 0:51


https://www.youtube.com/watch?v=mujdSP-fM98

Jul 31, 2012 - Uploaded by GPSCity

In this video learn how to RESET the Garmin nuvi 30, 40, and 50GPS back to factory default settings. Back up all ... With the GPS unit off, press the bottom right hand corner of the screen. Turn the unit ... Show more. Show less.

Jan 05, 2016 | Garmin Nuvi 200w 250w 260w 580 660 670 680...

1 Answer

My garmin nuvi 660 touch screen dosen't work


To calibrate the touchscreen on a nuvi 300 or 600 series:
  1. Power the unit On.
  2. From the Where to? / View map screen, touch Settings (wrench icon).
  3. Touch Display.
  4. Touch Recalibrate.
  5. A new screen will display that says Press Dot.
  6. Touch the center of the dot.
  7. Keep touching the center of the dot as it moves around the screen.
  8. When Calibration Complete appears on the screen, please touch OK.
The touchscreen will now be recalibrated.

If your touchscreen is not responding to any touch and preventing you from recalibrating the touchscreen using the instructions above, please follow the steps below:
  1. Connect your nuvi to your computer with a compatible USB cable.
  2. Open the Garmin Nuvi drive located in MyComputer/Computer. (Note: Mac users can locate the Garmin Nuvi drive icon on the Desktop.)
  3. Open the Garmin folder.
  4. Locate and delete the GUPDATE.GCD file.1
  5. Safely disconnect your nuvi from your computer.
  6. Power the nuvi Off.
  7. Power the nuvi on by holding the power button.
  8. Continue holding the power button down for 1-2 minutes until the screen calibration option displays.
  9. Touch the center of the dot as it moves around the screen.
  10. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated and should respond properly.

Oct 24, 2010 | Garmin Nuvi 660 GPS Receiver

1 Answer

I have a garmin nuvi 660. the touch screen isn't working


To calibrate the touchscreen on a nuvi 300 or 600 series:
  1. Power the unit On.
  2. From the Where to? / View map screen, touch Settings (wrench icon).
  3. Touch Display.
  4. Touch Recalibrate.
  5. A new screen will display that says Press Dot.
  6. Touch the center of the dot.
  7. Keep touching the center of the dot as it moves around the screen.
  8. When Calibration Complete appears on the screen, please touch OK.
The touchscreen will now be recalibrated.

If your touchscreen is not responding to any touch and preventing you from recalibrating the touchscreen using the instructions above, please follow the steps below:
  1. Connect your nuvi to your computer with a compatible USB cable.
  2. Open the Garmin Nuvi drive located in MyComputer/Computer. (Note: Mac users can locate the Garmin Nuvi drive icon on the Desktop.)
  3. Open the Garmin folder.
  4. Locate and delete the GUPDATE.GCD file.1
  5. Safely disconnect your nuvi from your computer.
  6. Power the nuvi Off.
  7. Power the nuvi on by holding the power button.
  8. Continue holding the power button down for 1-2 minutes until the screen calibration option displays.
  9. Touch the center of the dot as it moves around the screen.
  10. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated and should respond properly.

Oct 24, 2010 | Garmin nuvi 650 GPS Receiver

1 Answer

Nuvi 660 touch screen not responding


Please see this link:

http://www.sharc.net/gps_LCD_repair.htm

- Jim

May 20, 2010 | Garmin Nuvi 660 GPS Receiver

1 Answer

Cant enter pin or screen is frozen


Look near the SN # and press the reset button.

or

with the garmin off, hold down the right bottom of the screen and turn the garmin on, it will then ask you if you want to perform a hard reset. Choose yes and that should fix your problem.

Nov 11, 2008 | Garmin Nuvi 660 GPS Receiver

1 Answer

Nuvi 660


my nuvi was working great til last week when for some reason it would not load maps, get stuck on the first screen and then just shut down.

Jan 22, 2008 | Garmin Nuvi 660 GPS Receiver

Not finding what you are looking for?
Garmin Nuvi 660 GPS Receiver Logo

2,429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

Steve

Level 3 Expert

3289 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...