Question about iLO 3200 32 in. LCD Television

2 Answers

What the hell

The remote just stopped working and i cant find a universal remote for it. i started pushing buttons manually. the buttons are sinking in. this is rediculous. this is my second ilo with problems.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: what the hell

Use one of the Emerson codes, I had to try a few but I got it to work. Hope it works for you as well

Posted on Jan 22, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers
Re: what the hell

Alot of universal remotes don't list all the codes that thier remotes are capable of transmitting. Find a universal remote that has manual code search and you should be able to find one for your ILO. The RCA universal remote Model number RCU404
which is widely available should get the job done and is very easy to program and is low cost ( about 9.00 ).

Posted on Jan 18, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need code for my vizio tv i bought a ihip remote control for my tv

The instructions on letting the Hipi remote to seach for the code that came with my remote are not correct. I used the instructions from HOWTO.COM and printed below. There are two changes from the printed instructions. The first is to push the <TV> button after the <Code Search> button. The second is that the <Enter> button saved the code not the <MUTE> button.

Turn on the Vizio TV.
Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
Press the "TV" button at the top of the Jumbo Universal Remote.
Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. (This took only a few tries for my Vizio TV)
Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Nov 15, 2011 | Vizio VA26L 26 in. LCD HDTV

1 Answer

When trying to set up my new SRP2008B remote should the TV be on or in standby mode? In step 2 should the red LED be flashing or stationary? The Quick start guide is somewhat ambigious about these two...

U are setting up a universal remote?Yes,tv should be on,second push the search button on the remote,should be flashing and enter all those codes provided by the manual one by one the LED light of the remote should be solid red as the codes enter one by one the red light and go off and pushing the on/ff button on the universal remote for each codes as u got the wright codes the tv will turn itself off.

Apr 11, 2011 | Philips Flat Panel Televisions

1 Answer

My vizio unversal remote stop working for my dynex tv

Check your remote cell. and also then any other remote with your tv. If other remote working with your tv than the tv is ok. Now u need to open the remote manual and read it carefully. If u have no manual then try this trick as the most universal remote require settings. turn your tv on and press the mute button on your mobile for 30 to 45 seconds. As you tv show mute immediately release the mute button. Remote will start work again as it needs to correct code for different models. If no success try too contact the store from where u but it or buy new one

Mar 20, 2011 | Flat Panel Televisions

1 Answer

I am trying to program my universal remote control for a citizen tv model no JCTV3242A

Hell, depending on the brand and model of your universal remote, there are two procedures to program it to work with your citizen TV, first the direct code procedure(list of codes included in the owners manual) or the code scan procedure consisting of pressing certain keys on your remote untill the code that programs your citizen TV is obtained. I suggest going into the website provided by the manufacturer of your remote to obtain both procedures.

Nov 24, 2010 | Flat Panel Televisions

2 Answers

I am using a Philips SRU3003WM/17 Universal Remote with my Sylvania TV Model number 64119E. When programming the remote some strange numbers appeared on the screen and now I cannot get them off. The...

Hi there,

Well your Philips universal remote control comes with a list of codes for devices by brand name.
Find the first code for the brand name and type of device you wish to program. Turn all of your devices off, and then manually turn on the device you want to program.
Press the Setup button on your the universal remote and continue to hold it down until the indicator light stops flashing and remains solid. Release the Setup button. Press the Mode button for the type of device you want to program on your Philips universal remote, such as the TV.Release it immediately and make sure the indicator light is illuminated. Enter the first possible four-digit code on the universal remote, and then press another button on the remote to see if the device is now programmed, such as the volume control or power button. If the device responds, you have successfully programmed your Philips universal remote. If not, turn the device off and back on and follow the steps again using the next code on the list. Repeat until the device successfully responds.

If your TV code is not listed on the manual then you can use the Remote Using Code Search Option -
Your Philips universal remote has a built-in code search feature that will find the correct code for your device. This process may take longer than using direct code entry, but can be helpful if you do not have access to the code list or if the brand for your device is not listed.

Make sure all of your devices are turned off, and then manually turn on the first device. Press the Code Search button and hold it down until the red indicator light stays illuminated. Press the Mode button for the type of device you want to program on your Philips universal remote, such as the TV button.  Release it immediately and make sure the indicator light is illuminated. Press either the Channel button until the device responds. You may have to press the button up to 300 times. Each time you press the button, the Philips universal remote tries a new code. When the code works, press the Mute button on the Philips universal remote and the code will be stored.

I thing you wrongly do the second option that creates the problem. No issue, if your tv code not listed on the manuals then you can go with the second (code search) solution. Please post comments for further help or information.........

Good Luck!!


Jul 31, 2010 | Flat Panel Televisions

2 Answers

Tv doesnt respond to buttons or remote

this is looking like a common LG problem our tv started doing this tonight

May 15, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

My remote has stopped working

please confirm if your remote is still working by trying this step. turn on your am radio then push a button in your remote cont. while you're turning the tuning dial, or manual tune , you must hear a signal as you press the button. if nothing heard then the remote is defected. if okay it might be your receiver inside the tv need check-up.You can obtain a universal remote cont. in the market today.

Jul 09, 2009 | Flat Panel Televisions

1 Answer

URC-22B doesn't work with my BEKO tv.

Check with this method. Manually turn on your tv.
Then push and hold the code saerch button until the light stays lighted release the button.
Push and release the device button you want to set TV.
Now you got to push and release the ON/OFF button until your device turn off when your device turn off stop and push and release the enter button for storage the code.
Warning: You may push and release the ON/ OFF button for almost 200 times.
Good luck.


Jun 12, 2009 | Flat Panel Televisions

1 Answer

Rca Universal remote RCR311W

Try with the philips this method:
Manually turn on the tv or the device to be controlled.
Push and hold the code search button until the red lights stand.Now release the button push and release the tv button,then you got to push and release the on off button until the device turn off stop push and release the enter button.
You might need to push the on off button 1 to 150 times.
Good luck

Aug 22, 2008 | Flat Panel Televisions

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66685 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you an iLO Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides