Question about NetGear - WG311 - 54Mbps 802.11g/b Wireless PCI Adapter (TGN1001486P)

2 Answers

Code 10 Error

Tring to install the w/l adaptor in vista computer
got code10

Posted by on

  • flowerfairy May 09, 2008

    device manager, graphics controller and imaging devices are not working,showing code 10 . waiting for message from microsoft

  • Anonymous Jun 16, 2008

    also getting a code 10 error can't install, this pisses me off I double and triple checked with the salesperson they said this was supported with Vista

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Issues: Code 10 error, Physical Memory is 2GB +

1. Go to http://www.station-drivers.com/page/marvell.htm
and download the Marvell Libertas driver Version 1.0.0.53 date: 10/16/2007

2. Run the self-extracting Zip file to uncompress the driver files

3. Under driver\inf\Vista...\32BITS there is a file called "netmw13b". Copy this file to c:\windows\system32\drivers, overwriting the file that is currently there

4. Reboot Vista

There. Four easy steps. Someone please give this a try and let us know whether it's really that simple.


Notes...

32 bit Vista SP1 will install a May '07 driver which will not allow more than 2Gb RAM .Run InvokeSetup after extracting and v. 1.0.0.53 of the driver will be installed. After doing this I added 2GB more RAM (4GB total) and everything works.

Posted on May 09, 2009

Ad

Get another card, it don't work under Vista!

Posted on Feb 06, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Omg i have tried a lot on sony nwz-b133f(b). i downloaded the firmware and when i connect mtp driver not sucessfully installed and when i tried to update it says the driver is already up to date and...


I'm sorry for the difficulties you're experiencing in connecting the Walkman player to the Computer and getting the Code 10 Error message.

Please click hear to view the solution from Microsoft to resolve the code 10 Error message.

Thanks for understanding. Please let me know if you require any additional help.

Jul 25, 2011 | Sony NWZB133F MP3 Player

1 Answer

I recently installed vista business on my pc in the begining my philips saa7130 tv tuner was working but after getting some vista updates it stopped working pointing error code 10


error code 10 says that the device is not properly configured or it is conflicting with another device... uninstalling the device and reinstalling the drivers should fix the issue...
In most case restarting computer has fixed these kind of issues...

Jan 15, 2011 | Philips SAA7130 TV Tuner/FM Radio/Video...

1 Answer

Microsoft 6to4 adapter. Device cannot start code 10 error


try uninstalling these devices remove anything conected to laptop and restart. might help

Dec 03, 2009 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

Code 10 error


okay some ppl have been having the same problem with that device cause the PID number isn't the same

First find out what VID and PID Numbers you have

Step 1 go to device manager locate the "Linksys wireless G usb network adapter" (the name in quotes may be different for you but find your card which should have a similar name)

Step 2 right click on it and go to properties

Step 3 go to details tab

Step 4 either write the VID and PID numbers down or leave that window open to come back to later

Then you find the INF file and open in notepad (the one you downloaded 1xxx for vista)

Lastly in the INF file you locate the section under

;--------------------------------------------------
; Added support for Belkin and Linksys
;--------------------------------------------------

And place your VID and PID numbers in the appropriate spot

;--------------------------------------------------
; Added support for Belkin and Linksys
;--------------------------------------------------

;Belkin F5D7051
%F5D7051_DeviceDesc% = RNDIS, USBVID_1799&PID_7051
%F5D7051_DeviceDesc% = RNDIS, USBVID_050D&PID_7051

then save the file, re install the driver and restart your PC...

Good luck, let me know

Apr 23, 2009 | Computers & Internet

1 Answer

Getting Vista to use my wireless internet connection correctly


One question, is... do you need to enter a KEY or is this an open network?
I have found that with a new computer, you need to do the following to connect.
If this is an open network, then leave your router running, and just do a cold boot with your computer.
IE: Shut down, count to 10, and then re-start.
You may also need to connect (by network cable) to your router and make sure the wireless is turned on.
Most new rountes start with the wireless disabled.

Jan 01, 2009 | Microsoft Windows Vista Home Premium with...

1 Answer

Lite-on DVDRW LH-20A1S This device cannot start. (Code 10)


Hello Urgu.

You get code10 error when the DVD drive drivers are not assighned correctly.

I will provide youa fix download and execute it then restart the notebook. This will resolve the issue.

Fix for Windows vista:

http://techiesspot.com/filez/vista%20cd%20dvd%20fix.zip


Fix for Windows XP:

http://www.dougknox.com/xp/scripts/xp_cd_dvd_fix.vbs


Waiting for your reply.

Sep 15, 2008 | Lite On Computers & Internet

2 Answers

Acer computer error number 10 when loading software


what software were you trying to install?, as a code10 error refers to hardware not software, so if it's a driver you are trying to install, the peice of hardware it refers to may be faulty.

Nov 27, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

1,197 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...