I replace the crts green and blue and know good color but cant get my covergence adjusted right what is the best way to adjust the all covergences i know were the two are tabs on the yoke but what does what and witch way to turn

i also have this tv. i removed backcleaned mirrior, back of screen and lenses VERY GOOD. Then turned on tv go to convergence, sepaerate cross hairs then adjust focus on lenses. Then lenses rotate maybe about a 1/3 turn total by hand. Grab ring that houses lenses and turn until cross hairs are as clear as possible. This can be done with out help by watching inside of screen. red and green are adjustable, the blue is adjustablealso but i couldnt find blue cross hairs, maybe by covering red and green lenses the blue will show on screen. anyway when done and cross hairs are clear,lenses, mirror and screen are clean, you can adjust covergence and get a very clear screencleaning will also brighten pic. Pete

If you bought a kit with instrucitons contact the company you purchased it from. They will help.

My guess is that you did not change the fluid in the blue and green tubes. You may have accidently done the red instead.

U can't adjust this,Ur convergence is dead.U know how to solder?Buy ur tv name and brand the covergence kit,replace what the parts in that kit.

Ur IC in ur Convergence board is short or dead.
Must be replace.Adjusting the yoke colors plastics wheels alone wouldn't help or work.

Replace STKs you have 2 of them and 3 resistors near ICs 2.7 ohms.

there may be a green tube issue or there could be a screen voltage or screen control adjustment issue. There is a control block with six adjustment screw inside the front panel in front of tv. WARNING high voltage exsit in this set and adjusting these controls really should only be done by a tech,....So be careful

covergence problems and its not adjustable you need work done on the convergence board or a new board and realignment which can be timely.

http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

press and hold menu then push power then volume.

the big converence ics like SK----- as they go bad your covergence with shift and shift and become unjustable..need to replace them. the bulbs? if your messing with CRTS dont or even try turning the yokes. sometimes it takes me hours and days to put all back right what the customer did....alot of times if you call my shop and said you were working on it Id tell you to call somebody else. good luck