Question about Vtech 5.8GHz Analog Cordless Phone

1 Answer

Having trouble putting memory of names and numbers.

kindly tell me why I cannot do this task. I misplaced my owners manuel.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: having trouble putting memory of names and numbers.

First you have to push the PROG button on the phone (Its located by the REDIAL button.) Then you push the round SELECT button located by the on and off buttons. After you do this you simply use the number pad to enter the name in which you wish to store in your directory. If you mess up you can go back by using the volume - button.(also known as the CID button) When you have finished typing the name hit the round SELECT button. Now you are ready to enter the persons telephone number. When you have finished hit the SELECT button once more and you have finished storing it. To see the number in which you have just stored hit the DIR button, also know as the volume + button.  

Posted on Mar 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sir pls tell whose phone number is this nd tell the owner name nd adress pls sir 9963010443

Service Provider : Airtel Service Type : GSM Service Region : ANDHRA PRADESH sidharthpk_0.gif

Dec 05, 2010 | Phones

1 Answer

Need to record phone numbers on speed dial - have lost the owners manuel - 4 line phone

Storing a Name and Number in Memory
1. Press the STORE button on the handset, ENTER NUMBER is displayed.
2. Use the keypad to enter the phone number (up to 32 digits).
3. Press the SELECT button. The display shows ENTER NAME.
Telephone Operation
4. Use the touch-tone pad to enter a name (up to 21 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.
5. Press the STORE button again to save your selection. ENTER LOCATION is displayed.
6. Enter two digits to enter the location, ranging from 01 to 40. For example, to store the record in location #5, press “0”, “5”. After entering a valid location number, the record will be saved. If the memory location you selected is not empty, OVERWRITE? will show in the display. Press the STORE button again to confirm the current record and overwrite the old one or press the EXIT button to select another location.
7. To enter another name and number in a different memory location, return to step 1 and repeat the process.

Good Luck.

Jan 30, 2010 | RCA 25413RE3 Corded Phone

2 Answers

After many years have misplaced the instruction manual for our Vista 200. Need to know how to set up names and numbers for the automatic dialling feature.

First, ensure the display is bright enough. If it is not, press successively on the "Brightness key" that is located on the top of the phone above the "Memory key". You have 8 brightness settings. Note that the "Brightness key" has no label.

You are now ready to start programming.

1. Press the "Memory key". It is labelled "Memory" and is located above the "Memory keys" numbered 1 to 10 on the right-hand side of the phone.

2. Press the "Memory key" you want to program. (1 to 10)

3. Enter the number you want to program using the "Dialling keys"
1, 2, 3,
4, 5, 6,
7, 8, 9,
*, 0, #

4. Once the phone number is entered, press the "Memory key" again.

5. Now enter the "Name" for the phone number you just entered. To do this, you press the "Dialling keys" as follows:
For A press the "2" key once,
For B press the "2" key 2 times,
For C press the "2" key 2 times,
For Q press the "7" key 2 times,
For Z press the "9" key 4 times.
Use the same for all letters.

To go to the next letter, press the "Right arrow key".
For a space, press the "Right arrow key".

6. Once the name is entered, press the "Memory key" one last time. You are done.

7. To test it, press the "Memory key" you just programmed.

Oct 19, 2009 | Bell BE-412CID Corded Phone

1 Answer


Here is the website to download tyou manual from General Electric. You need to have the model number.

Dec 19, 2008 | GE Telephone pr521w

3 Answers


here it is

Nov 28, 2008 | Panasonic KX-TG5439 5.8 GHz Dual Handset...

1 Answer

Setting up my answer machine for a KX TG2740S

If you need assistance with the set-up or operation,
call 1-800-211-7262

Feb 23, 2008 | Panasonic KX-TG2740 Cordless Phone

1 Answer

Programming GE corded speakerphone

I fixed this just now on my phone, while seeking a solution here.
- Do not do what you'd think... putting the phone and name info first. It looks like it will take this info but it won't. That's where the frustration comes from.
- Dial the PHONE# FIRST.
- THEN click STORE.
- Then click the location (A-C or 0-8... save 9 for 911 if you don't have a red emergency key).
- Then click STORE again.
- Then type in the phone number again... this works, though there's probably a way to do it w.o putting in the number twice... but since it works, don't sneer at the free advice :) LOL.
- Then click Store
- Then type in the NAME
- Then Store.

Done. Repeat for other names/numbers. Now that you have it down, you can figure out how to do this without entering the phone number twice... but since I have a busy day, I'm just doing it this way.

Best wishes!

Oct 03, 2007 | GE Corded Phone

1 Answer

ConairPhone SW324WCS

I just had same problem and went conairphone site and found model sw322 that looked about the same. I downloaded the manuel and it worked for my phone. Here it is. MEMORY FEATURE To Program Your CONAIRPHONETM telephone is equipped with 10 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each of the numeric keys (0 through 9), by following the steps outlined below: 1. Lift handset (releasing hook switch). 2. Press and release STORE key. 3. Press the keys for the telephone number you wish to store. 4. Press and release the STORE key again. 5. Press the keypad number (0-9) you want that telephone number stored in. 6. Your number is now stored. 7. To change a stored number, repeat the same process. The new number will store over the old stored number. A Memory Index card is provided for your use in writing down the person?s name. To Retrieve Memory Numbers Keypad Memories: To retrieve numbers stored in the keypad, pick up the handset and press the MEM (Memory) key. Then press the keypad number (0-9) which stores the telephone number you want to dial. Your call will be automatically dialed.

Jul 12, 2007 | Conair SW324WCS Corded Phone

3 Answers

Storing Speed Dial Phone Nmbers

Emergency/quick dial numbers: Pick up handset, push store, enter the phone number (it will not call the number), push store again, Push A,B or C. hand up handset. Frequently called numbers, pick up the handset, push store, enter the phone number, push store again, push key pad 1, or 2, etc. for memory location. Hang up handset. How to change a stored number. just repeat the sequence. How to clear a stored number, repeat the storage skip step 3 (do not enter the phone number). How to correct an error while storing, just hang up and repeat.

Feb 26, 2007 | GE Telephone pr521w

Not finding what you are looking for?
Vtech 5.8GHz Analog Cordless Phone Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Phones Experts


Level 3 Expert

94113 Answers


Level 3 Expert

18259 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you a Vtech Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides