Question about Braun Tassimo Espresso Machine/Coffee Maker

1 Answer

All the lights are flashing!!

All the lights are flashing andI cant get it to work..why is thi??

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: All the lights are flashing!!

You need to refill with water and then put the tank in. Turn off and start.

Posted on Jan 29, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Nespresso U - the lights keep flashing but doesn't work

have you done descaling try pressing the two buttons at the same time but keep holding them for 5 second tell me is it flashing fast or slow?

Sep 08, 2014 | Krups Nespresso U Xn250a40 Coffee Machine

3 Answers

Red ! light comes on and will not work

If it is a steady light water tank is not properly in OR dregs counting and drip tray is full. Pull out the drip tray and wait for the red light changes in to flashing, then put back the drip tray.

Mar 18, 2010 | Saeco Odea Giro Plus Coffee Maker

1 Answer

Flashing lights on my saeco italia espresso machine

I had the same problem, two green flashing lights with one red (water) all 3 would just keep flashing and not turn solid. No coffee can be made or hot water. I could not pump prime. The problem was the steam wand was blocked with old milk residue. It needs unblocking or you will never pump prime. I could not unscrew the steam I let it sink in a glass full of hot water for a few minutes and then turned the water knob counter clockwise to push out the softened residue. After that, everything was good. When water started flowing out of the steam wand, the red light turned off and the green lights turned solid. The obvious answer to why you can't pump prime is there is a blockage somewhere and best to start with the steam wand. --Mabada

Feb 22, 2010 | Starbucks Saeco Italia Digital Barista...

1 Answer

Saeco magic de luxe - water icon is flashing red and thus cant make coffee

Turn the knob ON to let the water flows out constantly until the red light goes off.

Jan 20, 2010 | Saeco Magic De Luxe Espresso Machine

1 Answer

Our machine has stopped working....the alarm light is on and flashing slowly so we have gone thru all the steps in the book to find out what is wrong. When we turn the machine on, the green lite goes on...

If red light slowly flashing....Please check brewunit,dregdraw, door and coffeebean lid is properly in .
If flashing fast..means ventilate(prime the machine)
If itis water in the tank or time to empty the drip tray.or the more serious case the grinder is not working or not self testing.

Nov 17, 2009 | Saeco Odea Giro Plus Coffee Maker

6 Answers

After descaling le Cube two flashing buttons won't stop so can't

I had the same issue. This is what a did:
Turn off the machine
Remove the tray/container and leave it outside
Turn on the machine and this time the power button should be flashing (preheating) then hold both cup buttons for 3 sec and it will be back to normal opertion....
For some reason the sensor needs to read that the tray/container is out of the machine...

May 16, 2009 | Nespresso D290 Espresso Machine

1 Answer

Standby light is flashing

I had the same problem with my machine and managed to get it working again in a few easy steps. This machine is great but it can be VERY tempermental so here are a few tips:
1.The barcode reader MUST be clean or it will not read what the disc is (It is the little glass screen where you place the disk.) If it is not clean the lights will all flash.
2. The little floaty thing in the water container has to be floating in order to keep the machine running- if it won't float, shake it well to dislodge the air pocket that might be jambing it.
3. If the red stanby light won't go away, it is because the disc you are using is either damaged or leaking and it WON'T go away until you replace the disc...(you might have to do it more then once) if that doesn't work- try hitting the reset button on the back of the machine (the little black switch that has a (- and o) as well as unplugging and plugging the machine back in. Lastly, what worked for me was inserting a new disk and only partially clicking in the disk so the 'heating' light came on- leave it like that for about 10 seconds and then very slowly close the disc completely. Hope this helped!

Feb 19, 2009 | Braun Tassimo Espresso Machine/Coffee...

2 Answers

My sirena does not work

anytime the water runs out and you need to refill the tank, you need to bleed the line so to speak. Take an empty cup and put it under the wand and open the knob of the steam wand until the blue light stops flashing

Feb 13, 2009 | Saeco Starbucks Sirena Espresso Machine

1 Answer

Program light and 12:00 are flashing, no buttons work

Press program set once, then switch to clock mode to set time.

Sep 27, 2008 | Cuisinart Grind and Brew 10 Cup Coffee...

1 Answer

Bt 10b coffee maker

You can send me your thermostat or I will send you my reservoir. There is no sense in throwing out 2 otherwise good coffee makers and Bunn will NOT supply replacement parts.

Oct 20, 2007 | Bunn BT10B Coffee Maker

Not finding what you are looking for?
Braun Tassimo Espresso Machine/Coffee Maker Logo

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Coffee Makers & Espresso Machines Experts


Level 3 Expert

94039 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a Braun Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides