After inserting memory card error shows

Never remove or insert a memory card while the camera is turned on. Try removing the battery, waiting about 30 minutes, and then putting in a freshly charged battery.

Never remove or insert a memory card while the camera is turned on!!!!!!

1) Insert your card in the mmc reader.
2) Find the drive in which it is inserted from your pc.
3) Right click the selected drive and select FORMAT but NOT quick format.
4) Now, in the file system selection part, select the file system to be FAT and not FAT 32 or NTFS file system.
5) Start formatting.

The largest SD card you can use in your Samsung NV10 is 2GB. thats why once you insert the 8GB sd card its shows card error or need to fromat.

FYI. for every digital camera there's a compatible memory card and you can see from the box or manual and Its writen SD or SDHC.

goodlukc and thank you

hello.. :)

dude,You will need to format your memory card, because i had this same problem and after formatting.. it is working fine..

Format error display shows memory card is unstable and need to be format through format option in Camera menu.
Format memory card, if that does not fix the issue, try another memory card in camera and check this memory card in another camera just to make sure either camera got problem or memory card is bad.

if you bent the card, you broke components inside...your going to have to get a new card.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Usually, this means you need to format the card in the camera before using. This completely erases the card and optimizes it for the camera.

take the memory card out of the phone and then try all of the options to reset to factory defaults etc and if it is related to the memory card it will just give you an error message of some description to state that it cant erase the memory card because you do not have one

i think you cards are faulty

Check the slot and see if the pins inside are fine, no breakages, free from dust etc. Try turning the camera on and off (completely remove batteries etc).