Bought a used tv that has a parental code on it. how do i reset or take off. Its a veiwsonic n2750W thanks

Master Code and Reset

Reset your Sony TV PIN

1. Press the HOME button.
2. Scroll down to Settings.
3. In the Personal section select Parental Lock (Broadcast)
4. Enter the Master PIN (9999)
5. Select Change PIN Code and change it to your desired PIN.

Reset your Sony TV PIN - YouView Support

YouView Support https://support.youview.com > parental-controls-and-pin

How do I set a PIN code for my TV or cancel ...

Sony https://www.sony.com > electronics > support > articles
Parental lock · Select System ? Parental controls ? Change PIN. · Select Watching TV ? Parental controls ? PIN Code. · Select Device Preferences ? Parental ...

..

Here is the procedure to
GA_googleFillSlot("TL-IMU-Article"); reset the parental lock code:

1. From the XBOX dashboard screen, go to settings and then parental control.
   
   
2. When prompted for the password, perform the following sequence using the XBOX controller: X, Y, Left Trigger, X.
   
   
3. Enter in a new password, or disable parental control entirely.
   

Thanks Roety

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

default passwords are often 1234 or all zeros that would be a good starting point

I can help you unlock your Mitsubishi HDTV V-Chip.

Please follow these steps to bypass the vchip or reset the V Chip password.

I hope that helps.
_______________________________________________
Reset Mitsubishi HDTV VChip Password
Bypass Mitsubishi HDTV Front Panel Lock

I will have to look the code up again i might have remembered it wrong give me a few hours to locate it thank you james it will reset the tv back to factory settings with no codes in the set, then you can set them your self.

If you forgot your password for this feature, press the following buttons on the remote, one at a time. (Note: You must be in the password entry screen) Press, Mute, Display,Clear and Reset, this unlocks parental controls and you can now re-enter a new password.
OR TRY THIS..
Press and hold Menu on the TV AND volume down on the remote for 3 seconds. Nothing will appear on the screen, and the Parental Controls will unlock, and you can re-enter a new password with the LOCK PARENTAL CONTROLS

Salutations ebarton,

According to the owners manual you should be able to reset your parental control code by using "0711".

If you would like to read the manual you can also find it at Magnovox's support website at:
http://www.m4c.magnavox.com/files/t/ts2746c/ts2746c_dfu_aen.pdf

Happy Channel Surfing.
Jon
Go Ahead. Use Us.

Good day.
Try to press power up button, channel up and volume minus at the same time. This should resolve your problem.


chris

same problem as discribed on a Quasar sp2722 0000 didnot unlock the parental control

thanks

If you have the remote for the set
you can reset the TV to factory
settings
while in the pin code entering
mode , press the recall button
4 times within 5 secondsThe
pin code will be
released (reset)