Question about Oreck XL2200 Bagged Upright Vacuum

1 Answer

Oreck vacuum quit working and running all at once

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers
Re: oreck vacuum

If it is running all the time, then you have a bad switch and will have to be replaced.

Posted on Jan 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I open an Oreck Iron Man?

There are quite a few screws that hold that unit together. A couple of them are under some "buttons" that you have to remove to access those screws. Hope this helps!

Feb 12, 2015 | Oreck Ironman Vacuum

1 Answer

How do I reset the carpet motor on my Oreck vacuum?

first,do you have an owners manual for this orek? second,if you can't find it call orek and they will gladly tell you.

Aug 30, 2014 | Oreck XL2200 Bagged Upright Vacuum

2 Answers

My Oreck vacuum cleane won't turn on

I have an Oreck vacuum. My son used it just earlier today and it worked just fine, then just a little while ago a tried to turn it on to vacuum our bedroom and suddenly it won't turn on! I tried plugging it into other outlets but it was no use. My husband takes a look at it and first thinks that the switch is out in it. He takes the handle apart and quickly realizes that it is not the switch that is causing the problem. Then he took the base of the vacuum apart, removes the spin brush part and cleans it off, puts it back together, and suddenly it works! He said that when those brushes get real dirty the motor gets clogged, then it just won't turn on. I'm just happy I married someone who can figure these things out, because even if I knew the problem I'm still no good with a screwdriver, taking things apart and putting them back together again. Hope this works for your Oreck too and it's running again for you soon.

Jun 18, 2010 | Oreck XL2200 Bagged Upright Vacuum

1 Answer

Oreck XL upright - has a 2 speed switch. Now only works in high speed not low speed. Will a new switch correct or is it the motor

Your vacuum is fine. The switch can either run at full speed or half speed. You are running at full speed, you need a new 2 speed switch. You can pick them up at an Oreck Store for $29 or around $15 on eBay

Jan 17, 2010 | Oreck XL Ultra Bagged Upright Vacuum

1 Answer

I have a oreck xl2 and while vacuuming the vacuum quit. The vacuum has the red power light on. Please advise

sounds like a bad motor. if the light is on at the switch and the motor doesn't run, then it could definitely a motor problem, worn down or dirty carbon brushes. the motor on these machines are not the best built, they require cleaning of the commutator yearly.

Nov 18, 2009 | Oreck XL2200 Bagged Upright Vacuum

2 Answers

My Oreck XL has quit sucking. The brush turns but

Same problem here with XL9100. Bag would not expand implying no suction. Motor ran and brushes turned. Easy disassembly using common tools found that a plastic bag had been sucked up and caused a blockage prior to the impeller. Cleaned up, reassembled, and everything worked fine after that.

Nov 05, 2009 | Oreck XL Ultra Bagged Upright Vacuum

2 Answers

My Oreck Vacuum cleaner keeps burning up belts. I

I am having the same trouble. I bought the vacuum new in October 2007 when my wife and I purchased a newly constructed home. Since it is only two of us, she only has to vacuum once a month. I have taken it in three different times and get the same story. It needed a new belt. Mine has white smoke coming out of it and smells like burning rubber. I contacted Oreck and got no results. They refused to let me discuss this with Dave Oreck, stating that he nevers talks with customers! Gary Neeble

Jun 05, 2009 | Oreck XL2000 Bagged Upright Vacuum

1 Answer

Oreck 4080 the bag fell off the vacuum,

If the bag doesnt have a bag holder then the bags just push onto the black connector - there is usually a hook at the top of the oval connector where the bag once pushed on, sits over the oval dust channel feeder and locks into place. Once the Oreck is switched on, the bag in theory should stick to the oval hole.

Jan 16, 2009 | Oreck Vacuums

Not finding what you are looking for?
Oreck XL2200 Bagged Upright Vacuum Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oreck Vacuums Experts

Ryan S
Ryan S

Level 2 Expert

328 Answers


Level 3 Expert

18258 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you an Oreck Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides