Question about Zanussi 24 in. DE6965 Built-in Dishwasher

1 Answer

Zanussi aqua plus not completing cycle

When switch washer on it makes a whirring sound, stops then nothing. After about 5 mins, the top green light and the 65 degree light flashe on and off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,003 Answers
Re: zanussi aqua plus not completing cycle - Zanussi 24 in. DE6965 Built-in Dishwasher Dishwashers


Posted on Jan 18, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Machine stopped and bells rang

It sounds like the water pump has seized judging from the noise that you were hearing.
When the water seals become old and worn, water seeps through and ends up in the pump motor bearings, which corrode and eventually fail.
Open the machine up and check the pump, they are not repairable, will have to be replaced should this be the case.

Feb 08, 2016 | LG Dishwashers

1 Answer

Hi I have a FDYF 2100 Hotpot dishwasher, which starts but then skips through the cycle to almost the end. Sometimes it does the complete cycle though. We took it to a repair place a few months back, he...

Shut power off for 5 min then turn back on.
sound to me you have water float problem washer will stop and pump water back out if sensing flood stage food is normaly the factor stopping float from drooping back down

Dec 10, 2014 | Hotpoint Dishwashers

1 Answer

I have a ADP5000MT, when I start a cycle it begins but after 5 mins switches to the bottom option - the =30''V symbol button and keeps flashing .. I cant find my manual

CODES: The Express program light Keeps flashing quickly

MEANINGS: Longer inlet time

Possible Cause: Faucets is not opened, or water intake is restricted, or water pressure is to low.

Jan 16, 2013 | Whirlpool Dishwashers

1 Answer

Zanussi zt485 washer stops after first cycle and quick wash light flashys

Maybe its time to check your filters if that does not help then maybe adjust this switch or purchase it. Located behind the kick panel follow link below for a look at the switch.

Apr 07, 2012 | Whirlpool Dishwashers

2 Answers

I need to know what the buttons say on the dishwasher. Mine have no letters


Some SHX46 washers have 4 wash cycle buttons and others have 5. The button on the left side on top of the door is the start/stop button regardless of how many wash cycle buttons you have.

If you have 5 cycle buttons, reading from left to right they will be as follows.

1. Top Rack Only / Sanitize
2. Power Scrub Plus - (Long wash for heavy soil)
3. Regular Wash - (Economy wash for light to medium soil)
4. Delicate Wash - (Shorter wash at a lower temperature for delicate items)
5. Rinse & Hold.

These buttons are also used for cancelling a wash cycle. Hold down buttons 2 and 4 (Power Scrub Plus and Delicate) at the same time to cancel a wash cycle and drain the water out.

If your washer does have 4 buttons, it means you don't have a Top Rack / Sanitize cycle, in which case the button configuration - from left to right - will be:

1. Power Scrub Plus - (Long wash for heavy soil)
2. Regular Wash - (Economy wash for light to medium soil)
3. Delicate Wash - (Shorter wash at a lower temperature for delicate items)
4. Rinse & Hold.

With this button configuration, the cancel cycle buttons are 1 and 3.

I hope this solves your problem. If you need any additional information, please post back.


Dec 12, 2010 | Bosch 24 in. SHX46B05 Stainless Steel...

1 Answer

The power is on the cycle light is on but on the right the first two lights are flashing together. help zanussi aqua pulse de 6744 s

Hi, the first thing the dishwasher does is fill with water, so this sounds like a Anti Flood water pump problem this is just behind the water pipe that feeds the clean water into your machine, one thing to check is if the machine is empty of water at the moment, if the machine has water in the bottom then it could be the Drain Pump.

Jul 29, 2010 | Zanussi 24 in. DE6744S Free-standing...

1 Answer

Hi, my Miele G1142SC makes noise at startup

Mine is doing the same thing. I tried running a finish cleaner though a cycle. I did nothing I was about to do the same thing again when it just stopped doing it. What did you end up doing?

Jul 20, 2010 | Miele Dishwashers

1 Answer

Zanussi ZDT6252 stops 1min into cycle

You need to reset the computer on the bottom. Had the same problem with mine. The Blinking led means the heating element is bad and will not operate.

Dec 30, 2007 | Zanussi 23 in. ZDT6252 Built-in Dishwasher

1 Answer

Dishwasher zanussi aquapulse

this sounds lie a door interlock, in most models this is a micro switch where the handle is inside the top of the door casing, i would start there, based on the info that you have given

Sep 19, 2007 | Zanussi 24 in. DE6965 Built-in Dishwasher

1 Answer

Zanussi zdt6252 stops on 'Rinse & Hold' midway thru Wash Cycle consistently...

The problem here is being caused by Blocked Filters in the Water suppoly In line/pipe. There are two(2) filters in this line, at the water connection point and at the Washer connect point(one at each end). If these filters become blocked, then the result will be a restricted water In-Flow and hence the Rinse & Hold Status. Disconnect the Water-Supply pipe and remove the plastic filters giving them a thorough cleaning before replacing them. All will be rectified by this action. Peter...

Jan 02, 2007 | Zanussi 23 in. ZDT6252 Built-in Dishwasher

Not finding what you are looking for?
Zanussi 24 in. DE6965 Built-in Dishwasher Logo

Related Topics:

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers


Level 3 Expert

1751 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides